[Answered] PS3 HDD Problem and CFW 4.30 help?
I lost my original HD, it was running with Rogero CFW 4.30. This is the Error: ("system can not start, can not find hard disk")
For testing, I plugged this HD into a computer, not recognized as a disk drive or appear in Disk Manager. Everything indicates that the HD passed away.
I've read that to replace the HD. My PS3 should be running a OFW. but, as I had no way to foresee that HD would stop working, I did not do downgrade before.
- New HD (Western Digital Scorpio Blue 500GB 5400 RPM)
- OFW 3.55.pup
- CFW 3.55.pup
- CFW 4.30.pup
- Downgrade 4.21 to 3.55.pup
I do not know how to reinstall Rogero 4.30. Could you help me?
REBUG had HDD backup utility, just think what HDD cloning software, it works like that, it copies 1:1 from your current HDD to your new HDD.
Anyway, if you want to upgrade HDD on Rogero, just go downgrade to 3.55 and change your HDD there, then go back to Rogero 4.30.
In REX 4.21, just swap the drive and re-install the REX 4.21, you will notice that in recovery that it require 3.55 for firmware even though you're on 4.21 CFW.