Results 1 to 4 of 4



  1. #1
    Senior Member Prince Valiant's Avatar
    Join Date
    Oct 2010
    Posts
    167

    [Answered] PS3 Hardware flashers help?


    I've been interested in one for a while now but, I wasn't sure on which I should be buying. I have a 20GB 1st gen (CECHB01). Thanks in advance to anyone that helps.

    After some reading, I found I need Progskeet. Next question being, can I use the clip adapter or will it need to be soldered?
    Last edited by Prince Valiant; 07-17-2012 at 04:08 PM Reason: Automerged Doublepost
    Best Answer - Posted by racer0018
    What you need is the progskeet. The progskeet injectous to program the progskeet to accept the NAND clip. The adaptor Pcb Kit to hook the NAND clip up to the progskeet. And last the 48 pin NAND tosp clip.

    Thanks

  2. #2
    Senior Member HeyManHRU's Avatar
    Join Date
    Dec 2010
    Posts
    3,010

    You can use the 360 clip which doesn't require any soldering to be done in the PS3.

  3. #3
    Senior Member Prince Valiant's Avatar
    Join Date
    Oct 2010
    Posts
    167
    Thanks. Is this it, and I assume I'll need the programmer?

    Sorry about all the questions, I don't want to get the wrong stuff.

  4. #4
    Forum Moderator racer0018's Avatar
    Join Date
    Aug 2007
    Posts
    685
    What you need is the progskeet. The progskeet injectous to program the progskeet to accept the NAND clip. The adaptor Pcb Kit to hook the NAND clip up to the progskeet. And last the 48 pin NAND tosp clip.

    Thanks