[Answered] ps goove at90usb 3 leds help?
I got the attached stick and can't get it to work I have flashed it like 10 times and tried it about 50ish PS3 firmware is 3.41 og 60gig i intsalled the drivers on xp so its recognized and used atmel flip 3.4.2 to flash the stick has 3 leds not 2.
can someone confirm if this stick is groovable and advise what file or steps need to be done I have used hermes hex files and other ones only the at90usb file. I have only booted my playstation once to a single green led but still no install app or anything under game.
also is it possible to have backup manager I have external and lots of titles.
This board should work just fine with any HEX file for Teensy board - try "psgroove_1.1_Teensy_1.0.hex" from the "PSGroove_1.1_All_Patched.zip" from EvillSperm all pack included here: http://www.ps3news.com/ps3-hacks-jai...poke-syscalls/
As an easy first check - after flashing the board via FLIP and using either Start application option in FLIP or simply removing and reinserting the board to your PC it should:
1. Lit up both Red + Green Leds (unlike prior flashing the HEX file)
2. PC should find USB HUB
3. PC should find another unrecognizable device
After that try in your PS3 and I'm pretty sure it should work this time