Progskeet downgrading NAND problem help?

[skotlin]

I try to downgrade with progskeet + 360 clip, make good dumps and flashing pass without errors but can't get in factory service mod. console power on for about 20sec and power off. i use break 1.2 dongle. dumps are patched with FlowRebuilder auto patcher with txt patch.

how i know that dmps are good? in first i try to patch with old patchcos and when power console it shut down after 1sec and beep 3times,then i flash original dumped fash and console work normally. please if somebody can help i really don't know what to do.

[racer0018]

They are know for shutting off after 20 to 30 secs. But when you are trying to put it in service mode you are putting the downgrade dongle into the USB closest to the bluray drive. Also when you turn it on you are pressing the power button and then the eject button right away.

Then wait for the ps3 to turn it self off and then put the modded lv1 file and the 3.55 Cfw into the same USB and turn it on then wait for it to turn itself back off. Then use the step 2 lv1 file on the USB and back into the same USB and power and eject again. And wait for it to turn on and all done.

Let me know.

[skotlin]

you mean lv2? nobody meant lv1 in tutorial and i don't have it. i do everything right you say but when i put dongle and power on, console power off after about 20sec, but everywhere say couple minutes. and my screen is always black and after couple attempts my tv dimm screen and don't respond any more when i power on console.

is rogero v3.1 good for this?

I have some changes but still not working. i flash again and then put dongle but nothing happend, dongle light didn't flashing and console shut down in few seconds, then i put usb stick with lv2diag for get in factory and rogero 3.1, after few minutes console power off, then i power on but no picture on tv, after i put lv2diag for exit factory but not help, console work but no screen on tv. an i found this txt on usb stick:

manufacturing updating start
PackageName = /dev_usb000/PS3UPDAT.PUP
settle polling interval success
vflash is disabled...
boot from nand flash...
creating flash regions...
create storage region: (region id = 2)
format partition: (region_id = 2, CELL_FS_IOS:BUILTIN_FLSH1, CELL_FS_FAT)
create storage region: (region id = 3)
format partition: (region_id = 3, CELL_FS_IOS:BUILTIN_FLSH2, CELL_FS_FAT)
create storage region: (region id = 4)
format partition: (region_id = 4, CELL_FS_IOS:BUILTIN_FLSH3, CELL_FS_FAT)
create storage region: (region id = 5)
create storage region: (region id = 6)
Initializing
taking a while...
start Updating Proccess
Initialize elapsed time = 59 msec
check UPL
Check UPL elapsed time = 43 msec
check Package Size
get package size elapsed time = 8 msec
start Updating Package
Update packages num = 28
Update packages total size = 163945171
Update Package Revoke list
read package revoke list package (576 bytes) elapsed = 12 msec
update package revoke list elapsed = 110 msec
Update Package Revoke list done(0x8002f000)
Update Core OS Package
read core os package (5212160 bytes) elapsed = 370 msec
update core os package elapsed = 1730 msec
Update Core OS Package done(0x8002f000)
Update VSH Package
sys_memory_container_create() success(id = 0xc0effffe)
Update VSH's package : 1/22
read vsh package (1870 bytes) elapsed = 13 msec
decrypt and verify vsh package elapsed = 26 msec
write vsh package elapsed = 7859 msec
compare vsh package elapsed = 0 msec
Update VSH's package : 2/22
read vsh package (1986317 bytes) elapsed = 150 msec
decrypt and verify vsh package elapsed = 133 msec
write vsh package elapsed = 807 msec
compare vsh package elapsed = 159 msec
Update VSH's package : 3/22
read vsh package (4827124 bytes) elapsed = 345 msec
decrypt and verify vsh package elapsed = 293 msec
write vsh package elapsed = 1346 msec
compare vsh package elapsed = 363 msec
Update VSH's package : 4/22
read vsh package (4184462 bytes) elapsed = 301 msec
decrypt and verify vsh package elapsed = 257 msec
write vsh package elapsed = 2242 msec
compare vsh package elapsed = 325 msec
Update VSH's package : 5/22
read vsh package (3217207 bytes) elapsed = 238 msec
decrypt and verify vsh package elapsed = 219 msec
write vsh package elapsed = 3059 msec
compare vsh package elapsed = 285 msec
Update VSH's package : 6/22
read vsh package (25344 bytes) elapsed = 18 msec
decrypt and verify vsh package elapsed = 28 msec
write vsh package elapsed = 1399 msec
compare vsh package elapsed = 9 msec
Update VSH's package : 7/22
read vsh package (7317217 bytes) elapsed = 520 msec
decrypt and verify vsh package elapsed = 359 msec
write vsh package elapsed = 11976 msec
compare vsh package elapsed = 439 msec
Update VSH's package : 8/22
read vsh package (10385664 bytes) elapsed = 732 msec
decrypt and verify vsh package elapsed = 261 msec
write vsh package elapsed = 5954 msec
compare vsh package elapsed = 478 msec
Update VSH's package : 9/22
read vsh package (10266880 bytes) elapsed = 724 msec
decrypt and verify vsh package elapsed = 266 msec
write vsh package elapsed = 8103 msec
compare vsh package elapsed = 483 msec
Update VSH's package : 10/22
read vsh package (10195968 bytes) elapsed = 723 msec
decrypt and verify vsh package elapsed = 250 msec
write vsh package elapsed = 2779 msec
compare vsh package elapsed = 463 msec
Update VSH's package : 11/22
read vsh package (10366208 bytes) elapsed = 735 msec
decrypt and verify vsh package elapsed = 272 msec
write vsh package elapsed = 9212 msec
compare vsh package elapsed = 502 msec
Update VSH's package : 12/22
read vsh package (10026496 bytes) elapsed = 711 msec
decrypt and verify vsh package elapsed = 257 msec
write vsh package elapsed = 5600 msec
compare vsh package elapsed = 479 msec
Update VSH's package : 13/22
read vsh package (9574912 bytes) elapsed = 684 msec
decrypt and verify vsh package elapsed = 333 msec
write vsh package elapsed = 12134 msec
compare vsh package elapsed = 516 msec
Update VSH's package : 14/22
read vsh package (9217536 bytes) elapsed = 659 msec
decrypt and verify vsh package elapsed = 415 msec
write vsh package elapsed = 17806 msec
compare vsh package elapsed = 516 msec
Update VSH's package : 15/22
read vsh package (7992576 bytes) elapsed = 575 msec
decrypt and verify vsh package elapsed = 360 msec
write vsh package elapsed = 17223 msec
compare vsh package elapsed = 478 msec
Update VSH's package : 16/22
read vsh package (8982224 bytes) elapsed = 644 msec
decrypt and verify vsh package elapsed = 366 msec
write vsh package elapsed = 6994 msec
compare vsh package elapsed = 487 msec
Update VSH's package : 17/22
read vsh package (8765184 bytes) elapsed = 631 msec
decrypt and verify vsh package elapsed = 328 msec
write vsh package elapsed = 19539 msec
compare vsh package elapsed = 685 msec
Update VSH's package : 18/22
read vsh package (9576960 bytes) elapsed = 688 msec
decrypt and verify vsh package elapsed = 272 msec
write vsh package elapsed = 19398 msec
compare vsh package elapsed = 719 msec
Update VSH's package : 19/22
read vsh package (8621056 bytes) elapsed = 622 msec
decrypt and verify vsh package elapsed = 237 msec
write vsh package elapsed = 15736 msec
compare vsh package elapsed = 764 msec
Update VSH's package : 20/22
read vsh package (7232836 bytes) elapsed = 526 msec
decrypt and verify vsh package elapsed = 361 msec
write vsh package elapsed = 17186 msec
compare vsh package elapsed = 674 msec
Update VSH's package : 21/22
read vsh package (7344037 bytes) elapsed = 537 msec
decrypt and verify vsh package elapsed = 247 msec
write vsh package elapsed = 3895 msec
compare vsh package elapsed = 491 msec
Update VSH's package : 22/22
read vsh package (7945799 bytes) elapsed = 578 msec
decrypt and verify vsh package elapsed = 191 msec
write vsh package elapsed = 1828 msec
compare vsh package elapsed = 439 msec
Update VSH Package done(0x8002f000)
Bul-ray Disc Player Revoke
Bul-ray Disc Player Revoke done(0x8002f000)
Update Program Revoke list
read program revoke list package (736 bytes) elapsed = 13 msec
update program revoke list elapsed = 309 msec
Update Program Revoke list done(0x8002f000)
move_2block_status_into_the_region(): region id = 3
rewrite_region() region id = 0x3, start_lba = 0x0, end_lba = 0x4000
rewrite region done (ret = 0x8002f000)
rewrite region elapsed time = 1015 msec
touch_1st_sector_in_block() region id = 0x3, start_lba = 0x0, end_lba = 0x4000
touch_1st_sector() done (ret = 0x8002f000)
touch_1st_sector() elapsed time = 1238 msec
rewrite_region() region id = 0x3, start_lba = 0x0, end_lba = 0x4000
rewrite region done (ret = 0x8002f000)
rewrite region elapsed time = 1016 msec
Update BD firmware
Update BD firmware done(0x8002f000)
Update Multi-Card controller firmware
read MCC package (28636 bytes) elapsed = 13 msec
update MCC elapsed = 29 msec
Update Multi-Card controller firmware done(0x8002f000)
Update BlueTooth firmware
read BT package (644322 bytes) elapsed = 55 msec
update BT elapsed = 59 msec
Update BlueTooth firmware done(0x8002f000)
Update System controller firmware
read SC patch package (4864 bytes) elapsed = 11 msec
read SC patch package (4864 bytes) elapsed = 11 msec
read SC patch package (4864 bytes) elapsed = 12 msec
Update System controller firmware done(0x8002f000)
update package elapsed time = 229286 msec
post processiong...
post processiong done
cleanup update status (ret = 0)
os version = 04.1100
build_version = 55054,20101127
region of core os package = 0x40000000
build_target = CEX-ww
build target id = 0x83
manufacturing updating SUCCESS(0x8002f000)
set product mode (ret = 0)
Total Elapsed time = 231692 msec

Finally i do it. now i try with KMEAW_CFW3.55_NO_CHECKPS3UPDAT.PUP and its work. thanx everybody who help me.

[racer0018]

You are right about the lv1. Sorry I have an iPhone and it auto corrects alot. It was trying to put live in when I was typing both times. When I post on the forum I use the iPhone cause easier for me to type then a computer with my shoulder all messed up. But make sure you only use no check Cfw. Also rogero is about the best Cfw I have found for downgraded ps3s, I would stick with that one. It is good to see you got it working. Let us know if you have any more questions. Thanks

[skotlin]

I have 2 more consoles waiting for downgrade. one i mess up and have 2 bad sectors, so FlowRebuilder can't do job. and other one can't accept fw. everything pass good but when install fw it wont work. don't have picture on tv

Today i try downgraded console but dont work, when start gaia or ftp server have only black screen. i install kmeaw 3.55when downgrading and now can't install anything else, all fw-s give that have installed same fw and no need for update, but when try install from recovery menu say to put 3.61fw