There are countless Jailbreak clones out there now and it seems every one of them use diffrent files. Is it possible to program say eg. a x2break any other files (eg. teensy 2 hex's) than their very special pup's ?!? Or do the sticks require the bin's, Pup's usw.. provided by their groups ?!?
Almost all of the clones require special payloads and loader programs from their respective manufacturer. The only way one would work with a payload for a dev board was if it had the same processor and clock speed (i.e. AT90USB1286 16mhz). You would also need to make sure that the dongle had a boot loader on board. In short, if you want to try different payloads, pick up a dev board like the Teensy, they are only $18.
Just download the files you need from their site, to get the stick to be recognized you perhaps need to press the reset button , the tiny one on the chip. One way to reach it you need a tiny thing like a toothpick or you just remove the case of the stick but be carefull not to touch it witch plain finger , statics.