[Answered] Need help on booting x3max?
i did as every guide says (no disc inside, no other usbs), i flashed it with the x3max's bin+hermesv4_teensy++2.0_at90usb1286_16Mhz.hex, removed the power cable (it's a 320gb slim move bundle one), put the usb, then the power, then the button combi (click on power and click on eject the next split second, right?) and an infinite sequence of "reb-blue-red-blue" is coming from x3's leds, the jb won't work, and i'm wondering what i'm doing wrong, tryed changing hex (udip_16mhz_hermesv4b_3.50_spoof.hex), but it won't seem to work either (same result), maybe i'm using wrong hexes? somebody could post what they're using if that's the problem ?
edit: adding a question, do i need to remove the power cable everytime i turn on the ps3 or just for when i remove the x3max ?
update: i got it to "work", the x3 now get the blue led (not flashing), but my sixaxis won't "load" and the tv says "no signal", also i can't turn off ps3 by any means, what should i do?
Last edited by bernywtf; 12-14-2010 at 04:03 PM Reason: Automerged Doublepost
Best Answer -
Posted by CJPC
Originally Posted by bernywtf
Assuming you are using a standard payload, those are designed to work on 3.41 only, you may want to upgrade to 3.41, then try again.