Mimimus AVR Usb help?

[Manmeet]

When i Load Teensy 1.0 as follows in to USB and i get the two red and green light as follows.. but immediately after it shows "USB Not recognized" and even in the PS3 it shows "Unknown USB found"

Any help plz...

[GrandpaHomer]

What windows version do you have? Have you installed the USB drivers? They're in the folder C:\Program Files\Atmel\Flip 3.4.2\usb (or where ever else have you installed your FLIP software). If you have windows 7 try the alternative USB drivers here: http://www.ps3news.com/forums/attach...chmentid=22006

For more detailed instructions have a look here: http://www.ps3news.com/forums/attach...chmentid=22007 (it's for another board but procedure is pretty much the same)

[Mantagtj]

you have to 1. unplug your ps3 then plug back in, 2. press power then release and quickly press eject button. then it should be red/grn then blue green or just green when activated.

I have a minimus the only time it says that if i forget to unlug the ps3 then plug it back in first, hope that helps m8. minimus rules !! lol

[Manmeet]

Thank you GrandpaHomer it worked...