How to flash Minimus AVR USB?
The only tutorials I can find are for Maximus AVR USB.
From looking on their site they Minimus Avr Usb uses the ATMEL AT90USB162 chip so if you flash the hex for that using Atmel Flip then you should be done.
also it says you can use the Teensy Hex...
The MCU is AT90USB162
The Board Type Has been designed to work as Teensy (Red + Green LED's) or you
can also set it to work as USBKEY (Red + Green + Blue Led's)
The Clock setting is 16000000
Download: Minimus AVR USB
Last edited by Mantagtj; 09-23-2010 at 07:21 PM Reason: Automerged Doublepost
You need to use Teensy 1.0 hex, not Teensy ++/2.0 Hexs.