First, how simple is it to change a blu ray drive round? I have a spare fully working one so do I have to remarry it as they say or just change the boards on bottom round? both are from 60 gig ps3.
Secondly another one I got was working fine but the fans were maxing out within a minute of turning on so took it apart, put new good thermal paste on and when put back together the eject/standby button on front isnt getting power.
Tried with 2 other boards I had spare and 2 other spare cables that attached the board to mobo and still nothing, also tried a spare psu for the same type and you can hear the slight crackle at back of pc when cable is inserted or you press the switch so I dont know if its a ground issue.