Having Black Cat issues

[Drakhen]

I have a black cat usb E Jtag Ver 1.6, in device manager the board shows as a at90usb162 but has a yellow caution sign on it.. in flip the lower right says communications off. when I try to load usb device it will not alllow me to go past that.

[DeadlyFoez]

reinstall the drivers from the flip/usb directory through device manager.

[junior2k9]

if your using windows 7 you need to reboot the computer and press f4 simultaneously while booting and when it brings up the boot menu check disable driver signature - continue booting into windows and reinstall driver.

[Drakhen]

Well I have tried the f4 thing unfortunatly I get a screen to boot up before windows starts with options for my laptop that allow me to run a dvd music and so forth with out running the os everytime I try f4 it boots to the quick launch stuff

It appears that the device will not accept the drivers... I have unistalled both flip and the drivers on the black cat. I then go to device manager and try to install the driver from flip and this is the message I get when doing so:

the following hardware was not installed
at90usb162
an error occured during the installation of the device
driver is not intended for this platform

[laggmaster]

Well I have tried the f4 thing unfortunatly I get a screen to boot up before windows starts with options for my laptop that allow me to run a dvd music and so forth with out running the os everytime I try f4 it boots to the quick launch stuff

the key may be different on your laptop... (BIOS are funny things) try each F1-F12 one should bring you to the MOBOs BIOS where you should be able to disable the desired function.

[Drakhen]

Ok I have gotten into the bios now, and disabled the quick launch program thing I had to hit esc to get into the bios
now I can not find the part I disable driver signature

the tabs I see are
Main Security Diagnostics system exit

I have searched each one of those and never seen the driver signature

[mikerock98]

Press F8 before the windows logo appears (right after your system is done posting)... disable drivers there...

F8 is a windows function and has nothing to do with the bios.

[Drakhen]

Ok the f8 is where it was so I do believe I disabled it I am going to double check now, but as it is I just uninstalled the drivers for the at90usb162 and then in device manager I tried to install the driver and I got the windows encountered a problem when installing the driver software to your device.