Sponsored Links

Sponsored Links

Results 1 to 3 of 3



  1. #1
    Registered User Dadfdon's Avatar
    Join Date
    Feb 2008
    Posts
    8
    Sponsored Links

    [Answered] Found a Board for Jailbreak, will this one work?

    Sponsored Links
    Itīs a AVR USB AT90USB162 Microcontroller Prototype Board with USB

    FEATURES

    * AT90USB162 microcontroller with 16KB Flash, 512B RAM, 512B EEPROM
    * ICSP 5x2 pin connector for in-circuit programming with AVR-ISP-MK2 (you generally don't need to use ICSP as you can program via USB)
    * Debug Wire could be performed by 3 wires connected to ICSP (AT-JTAGICE-MK2 have such lose wire connector which to be used, you need VCC, GND, RST signals only)
    * USB 2.0 Full speed connector
    * user button BUT (can be used to enter bootloader mode after reset)
    * reset button RST
    * takes power from USB no need for external adapter
    * external power supply and voltage regulator if USB can't provide enough power
    * Quartz crystall oscilator circuit 8Mhz
    * extension pin headers for each uC pin
    * four mounting holes 3.3 mm (0.13")
    * Grid 100 mils
    * GND bus
    * Vcc bus
    * FR-4, 1.5 mm (0,062"), green soldermask, white silkscreen component print
    * dimensions 100x80 mm (3.9x3.15")

    Almost only one i found which is still in stock. Thank you
    Best Answer - Posted by Luckluka:

    Yes! Get it.. It works!

  2. #2
    Banned User Luckluka's Avatar
    Join Date
    Jan 2010
    Posts
    146
    Sponsored Links

    Thumbs Up

    Sponsored Links
    Yes! Get it.. It works!

  3. #3
    Registered User Dadfdon's Avatar
    Join Date
    Feb 2008
    Posts
    8
    Sponsored Links
    Sponsored Links
    Thank you I +rep you

 

Sponsored Links
Advertising - Affiliates - Contact Us - PS3 Downloads - Privacy Statement - Site Rules - Top - © 2014 PlayStation 3 News