Sponsored Links

Sponsored Links

Results 1 to 2 of 2



  1. #1
    Registered User gehx's Avatar
    Sponsored Links

    Unhappy [Answered] flashed hermes v4b hex, now device isn't working help?

    Sponsored Links
    like the title says, I flashed hermesv4b avropendous at90usb162 8Mhz.hex to my jb device... when I plug it into my ps3, press power then eject it lights up green... however, I'm unable to run homebrew. So I was gonna flash another hex file... now xp doesn't even see the device as connected to my machine... nothing shows up in device manager, thus i'm unable to erase the chip... this is the device i'm using.

    any help would be great...
    Attached Thumbnails<br><br> Attached Thumbnails

    ps3jb.JPG  
    Last edited by gehx; 11-15-2010 at 09:06 PM
    Best Answer - Posted by Krisdog:

    When you flash the JB you more that likely had a bad file, happens a lot more than you think. Did you interrupt the flashing process? Did you use atmel/flip? If I'm not mistaken your JB is past the point of no return. If it's not being recognized , then you will never be able to re-flash psgrooves or hermes v4b (if that's what was desired.) If your pc dosen't recognize the chip it's shot. It is the ugly truth. Hope this helped save you time, buy a new one they are plentiful and cheap now.

  2. #2
    Member Krisdog's Avatar
    Sponsored Links
    Sponsored Links
    When you flash the JB you more that likely had a bad file, happens a lot more than you think. Did you interrupt the flashing process? Did you use atmel/flip? If I'm not mistaken your JB is past the point of no return. If it's not being recognized , then you will never be able to re-flash psgrooves or hermes v4b (if that's what was desired.) If your pc dosen't recognize the chip it's shot. It is the ugly truth. Hope this helped save you time, buy a new one they are plentiful and cheap now.

 
Sponsored Links

Advertising - Affiliates - Contact Us - PS3 Downloads - PS3 Forums - Privacy Statement - Site Rules - Top - © 2015 PlayStation 3 News