Results 1 to 7 of 7



  1. #1
    Junior Member dekaspace's Avatar
    Join Date
    Jul 2006
    Posts
    79

    [Answered] Downgrading a PS3 3.72 60 gig help?


    OK just a few questions really.

    Basically I see a E3 flasher, a E3 card reader and also someplaces saying you have to solder.

    So which one is right?

    I know the card reader is a card reader but it also says it can downgrade so I am confused.

  2. #2
    Senior Member mushy409's Avatar
    Join Date
    Oct 2008
    Posts
    329

    The E3 flasher is the NAND flasher part - there is some soldering, but there are NAND clips (solderless) for it.

    The E3 Card Reader is basically the dongle part - You can program it to act as either a Jailbreak or Service Mode dongle.

  3. #3
    Junior Member dekaspace's Avatar
    Join Date
    Jul 2006
    Posts
    79
    Ok can you give me a basic list of things, I havent soldered anything before but have a soldering iron so if its simple enough I can do it without it but if not the kit.

    So I need the flasher and the card reader?

  4. #4
    Senior Member mushy409's Avatar
    Join Date
    Oct 2008
    Posts
    329
    Depends on if you plan on downgrading below 3.55.

    The E3 Flasher is solderless - so no soldering is required (just checked their site)

  5. #5
    Junior Member dekaspace's Avatar
    Join Date
    Jul 2006
    Posts
    79
    Well I just want to downgrade and thats it though dual boot sounds good.

  6. #6
    Forum Moderator racer0018's Avatar
    Join Date
    Aug 2007
    Posts
    685
    The progskeet is solderless as well. But you have to get a clip with it. The e3 the clip comes with the kit.

  7. #7
    Senior Member elser1's Avatar
    Join Date
    Oct 2010
    Posts
    2,418
    can you please list everything needed to downgrade the ps3 nand with the progskeet.. name of clip and whatever else you need or is there a ps3 pack available for solderless on 256 nand 60gig?

    cheers