Sponsored Links

Sponsored Links

Results 1 to 7 of 7



  1. #1
    Contributor geeklogik's Avatar
    Join Date
    Nov 2010
    Posts
    18
    Sponsored Links

    [Answered] Bricked PS3 need help where to solder?

    Sponsored Links
    Hey guys bricked ps3 should I don't want to solder tristate to sbe. I am confused whether to solder to 3.3v VCC or the GND. Can you please help out. I bricked by flashing a rogero auto-patched dump. My dumps are good and have been verified by myself and others.
    Best Answer - Posted by geeklogik:

    thanks guy figured it out myself, you have to cut gnd to tristate wire after you flash with your orig dump. then boot and wallah

    thanks anyways, pls close thread!

  2. #2
    Senior Member technodon's Avatar
    Join Date
    Sep 2010
    Posts
    412
    Sponsored Links
    Sponsored Links
    i'm guessing its progskeet that you have? i think its GND.. might want a 2nd opinion though

  3. #3
    Contributor geeklogik's Avatar
    Join Date
    Nov 2010
    Posts
    18
    Sponsored Links
    Sponsored Links
    sorry its an e3 flasher.

    anyone please desperate!
    Last edited by geeklogik; 10-11-2012 at 11:33 PM Reason: Automerged Doublepost

  4. #4
    Forum Moderator racer0018's Avatar
    Join Date
    Aug 2007
    Posts
    793
    Tell us what motherboard you have in your ps3. Thanks

  5. #5
    Contributor geeklogik's Avatar
    Join Date
    Nov 2010
    Posts
    18
    jtp-001 all i need is to know where to solder 3.3V vcc or gnd, i know where both points are

    also can someone also state steps after soldering to unbrick? thanks !
    Last edited by geeklogik; 10-12-2012 at 01:07 AM Reason: Automerged Doublepost

  6. #6
    Junior Member pinkone's Avatar
    Join Date
    Jan 2012
    Posts
    34
    You can use the point on the flatcable or I use the one in the pic.

    Then to unbrick put your dump on the sdcard and set switch 1 up and the rest down after it's done flashing unplug the ps3 and set switch 1 down and you should be back where you started. I'd then use the e3_downgrade.bin to do your downgrade to 3.55.
    Attached Thumbnails<br><br> Attached Thumbnails

    Pinbelegungsdusbivehp.jpg  

  7. #7
    Contributor geeklogik's Avatar
    Join Date
    Nov 2010
    Posts
    18
    thanks guy figured it out myself, you have to cut gnd to tristate wire after you flash with your orig dump. then boot and wallah

    thanks anyways, pls close thread!

 
Sponsored Links

Advertising - Affiliates - Contact Us - PS3 Downloads - PS3 Forums - Privacy Statement - Site Rules - Top - © 2015 PlayStation 3 News