Results 1 to 2 of 2



  1. #1
    Contributor surfdawg561's Avatar
    Join Date
    Feb 2013
    Posts
    18

    [Answered] Adhesive after thermal paste to reattach IHS help?


    Hello, I have changed the thermal paste to prevent ylod. I also removed the Heat spreader (IHS) over the RSX chip and changed the thermal paste there, but The chip had adhesive on the 4 corners. After cleaning up I just applied thermal paste to the 4 corners and the center before replacing IHS. The IHS does not seem secure though.

    It would not fall off but it slides, sooooo... Does everyone use the thermal paste like I did or do you use some kind of adhesive on the corners to secure IHS. (I already put it back together and its running great but I plan on doing this)

  2. #2
    Forum Moderator racer0018's Avatar
    Join Date
    Aug 2007
    Posts
    685

    The adhesive is just to keep the heat spreader from coming off when you take it apart. I do glue them back down but it doesnt matter if you do or dont. thanks