Video: Guide to Remarry PS3 Blu-ray Drives to Other Consoles
Today megahiperultrafantas and Psmaniaco posted [Register or Login to view links] and a video on Spanish site Elotrolado (linked above) on how to remarry PS3 Blu-ray Disc (BD) drives to other consoles.
To quote, roughly translated: "We are the fantastic ultra hyper Mega Team. We have modified. Self and made impossible... The way to solve the problem the reader is:
First, downgrade to firmware 2.30 (you know how), then we launch the console normally (thus leaving the service before) and set the time, date, language and others.
Second: Go back to start the service mode.
In the stick, unzip the contents of the zip in the root of this.
Put the USB flash drive in the far right and turn on the PS3... will see something new on screen, when you see that makes drive init blue with a circle on the right is that it has been restored key in the reader.
We let you reinstall the 2.30 and also is configured to read all the films on bluray region free.
Exit the service mode (with the lv2diag FILE 2) and we have ready the reader by reading the games, except if we have the laser damaged.
Well, from here on out if you crack a controller bluray or ps3 you have two, one with a broken player and one with the ruptured plaque, you can exchange it and work the reader, this is the real lv2diag.self, who points in display all, it goes black and is waiting for us without knowing what happens (the manufacturer_updater_for_reset.self) I hope you like help and greetings to everyone!!
PS: Do not pay more to Sony for that you have broken the reader (since they can be made inoperable and not repairable with a reinstall of the firmware and the new consoles give one year warranty ...)
PDD: The key is stored on board and sent to the controller.
Required files which should be in the root, search the Internet... already been leaked...
Good guys, I bring you news that you have comforted those who messed controller or one that is not yours.
Doing some testing (edited at the request of the user) we have managed to link a controller to a different key to a plate of 60 GB with the result that the controller has been recorded in the main chip key plate and were married again recovering the execution of homebrew applications and games will keep you informed of the subject.
Video of the process:
Following up, Max1985 from DemonHades shared the leaked package which includes a modded lv2diag.self file that allows users to remarry a PlayStation 3 Blu-ray drive board on another PS3 console.
Finally, [Register or Login to view links] has made a guide on remarrying PS3 BD boards to other consoles, as follows:
Ladies & Gentlemen finally we can remarry BD boards to different consoles. The file was just posted over at DemonHades by one of the members (max1985) Put these onto a blank usb stick (not the devusb folder, just it's contents) & add a 2.30, or possibly other version PUP file. Put in the service mode dongle and get into factory service mode. Put the newly created USB stick into port 0 (closest to the reader) and run.
I have not done extensive testing yet, but have just remarried a BD board from a 60gig launch to a 40gig console.
Before you begin, make sure you are at or below 3.15. If you have 3.55 installed, you will need to use the modified 3.55 downgrade files first, then downgrade to 3.15 or lower and then finally begin the procedure.
1. It would appear that older 256meg nand Ps3's need to goto 2.30. Newer 16meg nand Ps3's should be fine from 3.15
2. Change your dongle to "Factory Service Mode"
3. Copy files from the folder downloaded above (the contents of the devusb folder) to the root of a blank usb stick
4. Copy the PS3UPDAT.PUP from 3.15 (or lower if your system can handle it) to the USB stick
5. Put the USB stick into the right side USB port on the PS3
6. Put the Dongle into any other port (furthest left is best)
7. Power off the PS3 using the power switch at the back
8. Turn the power back on
9. Press power then eject within .2 seconds
10. Wait until the PS3 turns off then press the power button on the front again.
11. The USB will now start to flash and do a "Drive Init" then install the PUP file.
12. The system will turn itself off again.
13. Power on and play a BluRay movie until the movie starts.
14. Remove Dongle and Usb Stick then insert "Exit Lv2diag" stick (aka Lv2diag file 2) into the same port it just was in the Ps3 (furthest to the right)
15. Press power to exit "Factory Service Mode"
Update: It would appear that older 256meg nand Ps3's need to goto 2.30. Newer 16meg nand Ps3's should be fine from 3.15
Update #2: I have a USA console here (I am in Aus) and it is not restoring BD playback. Model is original launch 20gig. This will be a work in progress and try to figure it out. In a nutshell, some drives may not get BD playback but will be able to play games etc etc.
Update #3: If you have a 256meg Fat PS3 - Read On. As we are all aware by now, downgrading kills BD playback on 256meg fats. Made even worse now by the fact we may be using a drive we dont even know the history of, right? Wrong, history is just that now if you have access to another 16meg PS3.
Update #4: The procedure below seems to be intermittent at best. I have had varying results since the initial tests were done. If yours does not recover BD playback, don't panic, your drive is fine, its just the luck of the draw.
1. Insert the NEWEST BD movie you can get your hands on into the 16meg PS3 - Latest release from a video shop is advised. This will update that system & drive with the latest HRL
2. Marry the drive you want to use on the 256meg fat
3. Remove both the drives (mark them if you have to)
4. Place the drive from the 256meg onto the 16meg system and marry them up.
5. Update the firmware on your 16meg Ps3 to whatever you normally use.
6. Insert the NEWEST BD movie again into the drive now on the 16meg
7. This wil update the drive with the latest version of HRL
8. Swap the drives back over and get the DRL files from the BD disc (or find them online) and transfer them to the 256meg fat PS3 in the dev_flash3 folder overwriting the ones already there.
Well, up until now, if your BD drive was broken (the board), or if you just wanted to build a PS3 from parts you could not, as the drive and mainboard were married together. A PS3 at times would not even work without a drive (programs would not run, etc). But now, you can just re-tie them together, instead of paying $150 for sony to do it for you (if they even would!)
A couple of facts that should be pointed out, their may be different models which will NOT work at all, due to the fact some BD Drives are designed for Dual-Eye lasers vs. Single-Eye lasers, and IDE vs. SATA drive hookup.
Also this most likely is only designed for the FAT 256mb NAND systems, as the 16mb NOR and Slim's use a different drive board marriage system.
And finally DO NOT TRY THIS ON v3.56 consoles, as YOU CURRENTLY CAN'T EXIT SERVICE MODE!
just when i thought i could replace the dead single laser drive on my 40gb running 3.56 with a double laser drive, you hit me with a damn truth train... lmao. oh well i guess i'll wait till someone pops up with a drive for trade.