OK folks, new release out.
SNES9x PS3 Build 4.3.7
A lot of changes. First off, much smaller pkg files. Second, no more separate '480p' and '720p' version - they're rolled into one.
That's just for starters.
Also, a word of warning on the resolution changing:Build 4.3.7 (19-10-2010) - rev. number f2e3e0bef2
-------------------------------------------------
* There's now a build for PS3s with firmwares below 3.41 (basically bigger than or equal to FW 1.92) and a build for PS3s with firmwares 3.41 or higher.
* You can now switch resolutions inside the Settings screen - go from 480p to 720p or vice versa, hence the need for two builds (480p and 720p) eliminated. (Halsafar)
* Zipped ROM support (ZIP/JMA) (Squarepusher)
* Savestates are now compressed as well (NOTE: I don't know what this will do to your pre-existing savestates. Try to back them up first - they're inside the USRDIR folder of /dev_hdd0/game/SNES90000/)
* Menu looks a whole lot better now at both 480p and 720p; crappy font has been put out of commission. It's now actually readable (Cmonkey69)
* Games that switch between SNES resolutions (Seiken Densetsu 3/Secret of Mana) are now both vertically scaled correctly - you don't even notice the resolution switch anymore. This is only at 480p mode - in 720p mode you will notice the same effect as you did previously. This will be worked on. (Halsafar)
* A lot of settings got added to the Settings screen. For instance, it's now possible (on most PAL games) to run them at 60fps by setting 'Force PAL ROM to NTSC' to ON. This won't work for every game, however (most games after 1993 came with region protection), and it might even result in a crash because you're doing something that is not deemed appropriate by either the SNES hardware or the emulator. A solution for PAL ROMs is worked on.
* You can return to a previous folder inside the ROM menu by pressing the CIRCLE button.
** - NOTE: You may get a black screen if your screen does not support 720p or you're not on a HDTV/monitor - in that case, try pressing Left again so you revert back to 480p
In any case, this should be a non-issue on most modern TVs/monitors, or just for those that do have problems, we're going to look at some ways of first determining whether the PS3's output device (the monitor/TV) actually supports said resolution before toggling it.
BTW - to the guy with the Earthbound controller problem, try this -
Go to the Settings menu, set 'Display button input' to ON, return to the ROM menu by pressing Circle button, then click L2+R2 to go back to the game, then tell me if you can see button characters on the screen when you press a button. This might help us determine whether this can all be chalked up to input lag of your telly, or whether it's a faulty controller.
13250 HeyManHRU
13207 PS3 News
11287 elser1
11119 oVERSoLDiER
9248 GrandpaHomer
8578 Tidusnake666
7968 saviour07
7340 condorstrike
7258 deank
6858 OGroteKoning
24951 PS3 News
5279 Starlight
2965 HeyManHRU
2173 CJPC
2123 elser1
1818 cfwprophet
1756 her0
1570 oVERSoLDiER
1291 GrandpaHomer
1080 barrybarryk





