I made a video for some reason, also i forgot to film it in portrait.
Just curious mate, but did you ever get your ps3 console working again after semi-bricking it? I haven't gotten my e3 in the mail yet, but was curious as it would royally suck if you have to get a new one. Cheers, and I hope all went well.
Lol, that's good. I just wanted to note here as well, if you replace the 3.41 pup with the original 3.50 pup, this will also save you from a semi-brick. Not only that, but your console should still be in service mode as well. So that should help anyone else who may or may not be experiencing this problem. Cheers!
Last edited by MSPARKY83; 12-06-2010 at 12:33 AM
lol i've just discovered the lowest firmware you can goto - took me ages to work it out.
it's surprisingly not that low
i'm going to do research on debug now <3
Are you referring to the lowest debug, or the lowest retail firmware? I know that you can install debug 2.15 firmware, and retail 3.15. I would love to know what else is possible. ^_^
btw, be careful when flashing the debug files it will change your SHA1 hash encryption.
Sorry for the double-post, but for some reason I can't edit my last one.
If you do happen to flash to 2.15 debug firmware, I would love to know if your able to come back from it to a retail firmware. On behalf of myself, and i'm sure the rest of the scene, thank you for your contributions in testing. Its greatly appreciated!
Last edited by MSPARKY83; 12-06-2010 at 12:50 AM Reason: Automerged Doublepost
what gives you the impression you can get 2.15 working?
i just tried updating 2.30 to 3.41 debug and its bricked it
Lol, try it, and then tell me if it bricked it.
Make sure that it is 2.15 Debug firmware though.
Last edited by MSPARKY83; 12-06-2010 at 01:09 AM
give me 5 minutes
and.. fail, it doesn't even start to write. it just fails.
here's the log:
manufacturing updating start
PackageName = /dev_usb000/PS3UPDAT.PUP
settle polling interval success
vflash is disabled...
boot from nand flash...
creating flash regions...
create storage region: (region id = 2)
format partition: (region_id = 2, CELL_FS_IOS:BUILTIN_FLSH1, CELL_FS_FAT)
create storage region: (region id = 3)
format partition: (region_id = 3, CELL_FS_IOS:BUILTIN_FLSH2, CELL_FS_FAT)
create storage region: (region id = 4)
format partition: (region_id = 4, CELL_FS_IOS:BUILTIN_FLSH3, CELL_FS_FAT)
create storage region: (region id = 5)
create storage region: (region id = 6)
taking a while...
start Updating Proccess
Initialize elapsed time = 22 msec
Check UPL elapsed time = 27 msec
check Package Size
get package size elapsed time = 8 msec
start Updating Package
Update packages num = 21
Update packages total size = 100379340
Update Package Revoke list
read package revoke list package (576 bytes) elapsed = 2 msec
update package revoke list elapsed = 107 msec
Update Package Revoke list done(0x8002f000)
Update Core OS Package
read core os package (4976256 bytes) elapsed = 267 msec
update core os package elapsed = 172 msec
Update Core OS Package done(0x8002f14b)
update package elapsed time = 548 msec
Updating or Verifying failure 0x8002f14b
manufacturing updating FAILURE(0x8002f14b)
Total Elapsed time = 1561 msec
Last edited by BwE; 12-06-2010 at 01:13 AM