PSGroove - Open Source PS JailBreak PS3 Exploit is Released!

[duduprj]

Thanks martenbroadclk !!!

[B1oH4z]

it SHOULD work, as it has the same chip as teensy 1.0.

somebody here had problems getting it to run though... they have different clock-speeds (teensy 1.0 16MHz, avr-usb-162 8MHz)

[Luckluka]

PCs dont have a way to switch to USB slave mode, and as such this is most likely impossible

So it seems using a computer to emulate the dongle through a USB cable is completely out, since the pc's usb port can't really work well as a slave device. So I have to ask... what about a serial port? Could a program be made that uses a serial-USB cable to accomplish this?

It is possible

@DarkAntiMatter

You forgot something important: USB-A to USB-A Cable

@Jericho417

COM(RS232) => USB Connector

and i am sure that both will work since a PC isnt something limited like a PSP or a phone

The PC Can do anything

[IamSovereign]

I think you should probably do that anyway...

I would but they haven't refined the power management yet. In the event of an andorid release of the PS3 jailbreak I would say screw the power management lol. Boot the android on the iphone and load the jailbreak with android then jailbreak the PS3... haha. This is getting out of hand...

[TUHTA]

could you try this .hex file?

i think the problem is, that the teensy-board has a 16MHz-clock, but the avr-usb-162 has only an 8mhz clock

i compiled it with a setting of 8mhz, maybe this will work.

is it Patched version? to run Backups

[B1oH4z]

yes, i used the patched one.

it's basically the teensy 1.0 one, but with a clock-speed of 8MHz instead of 16Mhz

[Jasmin05]

@B10H4z

IT WORKED !!! Unbelieveable i should kiss you now. Without you i would have been lost.

The olimex at90usb162 works 100% just a matter of changing the 16,000000to 8,00000 and it works ..so go and buy !!!!

Thanks again B10H4Z could u tell me how you compile it please!!!

and what programs you use!!

Thnx a lot

[mohp]

Now that we have the hardware sorted, when is a backup manager goin to be released

[TUHTA]

yes, i used the patched one

its basically the teensy 1.0 one, but with a clock-speed of 8MHz instead of 16Mhz

Thank you +Rep you so is it working? Somebody tested it?

[ragnar]

yes, i used the patched one.

it's basically the teensy 1.0 one, but with a clock-speed of 8MHz instead of 16Mhz

wow dude your a life saver, was looking at over $100 for a AT90USBKEY over here in aus but now i know that file works i can get a AVR-USB-162 here for $40 and THEY HAVE STOCK! WOOT thanks heaps bro!