I have had to modify a few things so I can compile this under linux, and so far it looks good I will upload some hex's soon.
I will need some feedback for all of you to let me know if they are working or not.
If you have a request for a specific board let me know but please don't ask for any pic boards unless you can give me the source, and don't ask for led's to be added unless you give me the proper leds.h or at least let me know what the settings should be for your board as I don't care about an led that turns off 2 seconds after the PS3 boots
Great job Evilsperm. Can you do it for one teensy 1.0 ? With at90usb162 chip.
My board have two leds, one green and one red, can you do it with this leds working ? If not, no problem, many thanks for the work.
need a 12mhz version if possible for the pic chip in the 360 usb spi jtag the chip is the PIC 18F2455. Mnay thx in advance. just saw about PICs, i have a workin 12mhz from the old psgroove and 1.1... sorry.
could you compile a 12mhz version or point me in the right direction to do it myself? any help is appreciated.