To quote, roughly translated: The pulse generator which was put very little refined and theoretically ill-posed. I really worked, but it is true that there was always the first. So I miss a second version, more refined and controlled by cycles. Because in cycles? Each computer is different, CPU, BUS, etc etc.
That is why every computer will have its own cycle which is ascertained to start from the smallest to find it. ;) In my case is 3, MSDOS running under a VMware virtual machine.
1. Keep off the PC LPT1. (At system start the strain is normally enabled.)
2. Now the pulse is generated through the numbers: 1 to 9.
3. Start always at least 1 in 25 attempts. If you notice that the generator does not affect the PS3 continue for the number 2 another 25 attempts.
4. Once the Exploit run, salis of the program by pressing any key and remember the number of cycles that worked well for you next time.
I'm not great at soldering, I can solder most things and succesfully did the JTAG x360 mod, however it seams like sony just make their soldering points extra small, the PS2 modchip was a nightmare to install.
Its almost like sony don't want you to solder to their motherboards they provide?! I have not opened my PS3 fat, but totally intend to do this mod once a pcb is built by a team or whatever.
dude i know that what i will ask is nothing about the topic, but... in the pic 1, i saw the way you stick the heatsink/cooler is different from the original way, looks like much better this way.. can u say how you make it? (some photo will be nice too hehe.
1. Setup VM to boot from the MSDOS CD/Floppy/ISO.
2. After the machine as booted exit the setup program (F3).
3. Type fdisk and create a partition and make it active.
4. Reboot again with the CD/Floppy/ISO.
5. After the machine as booted exit the setup program (F3).
6. Type format c: /q /s
7. Reboot again with the CD/Floppy/ISO.
8. The setup program will now allow you to install MSDOS.
9. Reboot again with the CD/Floppy/ISO.
10. Select option 2 to install the CDRom drivers.