PS3 BwE NOR Validator v1.16 and BwE NOR / NAND Patcher v0.01 Out
Following up on his BwE NOR Validator and BwE NOR Patcher, today PlayStation 3 homebrew developer BwE has released BwE NOR Validator v1.16 followed by v1.17, v1.18, v1.19, v1.20, v1.21, v1.22, v1.23, v1.24, v1.25, v1.28, v1.30 and v1.31 alongside BwE NOR / NAND Patcher v0.01 followed by v0.02 and v1.01 with details below.
1.31 - 27/05/2013 : added eid4 + fixed bug in entropy (note: possibly final version, unless adding firmware revisions/new consoles)
1.30 - 21/05/2013 : completely rewritten eid, cisd, ccsd + added more validations to it, upgraded other minor validations. all due to upcoming nand validator (note: possibly final version, unless adding firmware revisions/new consoles)
1.28 - 15/05/2013 : completely rewritten cvtrm validation + added more validations to it, upgraded/perfected entropy (possibly final version, unless adding firmware revisions/new consoles)
1.25 - 13/05/2013 : added entropy check for metldr/bootldr (possibly final version, unless adding firmware revisions/new consoles (From EussNL: Entropy is used for checking encrypted sections, like metldr/asecureloader and bootldr, which because of their encryption will have high entropy. When knowing the entropy of other sections (based on known good dumps), it can be a good prediction of the validity of it without interpreting or decrypting it.)
1.24 - 06/04/2013 : added more information to suit newly discovered ps3 data, improved validation, added a tip for bad md5's, removed version forcing (possibly last release).
1.23 - 29/04/2013 : improved validation, added 4.41 ofw information
1.22 - 16/04/2013 : added 115 more validations + changed statistic range for bootldr + other small boring changes
1.21 - 11/04/2013 : patch3 error fix.
1.20 - 10/04/2013 : added new console data, removed 3.56 patch (replaced with 4.40), added protection against using old validator, changed corruption check (again!), added quick info for console.
hi i'm sorry if i'm not good in en lang .., ok every time i try too un ban man console i failed but infact i have a pse fully broken (hardware) and i have the console id and psid. how can i exchange them to ps3 because every time i try for am moment everything is good but as soon as i turn off the system or restart it turn back to default !!!
the original default last time i use the psid patcher wel this can help me pou ro i must use something else
PS3 NOR / NAND Statistic Beta Homebrew App By Sinsizer Arrives
Following up on the previous updates from BwE, today PlayStation 3 homebrew developer sinsizer has made available PS3 NOR / NAND Statistic Beta for those interested in validating and checking their PS3 NOR / NAND dumps.
This tool works different than other validators. Instead of outputting a full log, it will output an error.log, if validate is checked. But see for yourself.
Always patching 3.55 is recommended to see if the patched statistic is right/green. ckp_management_ID values have to be equel as well as per_console_nonce (should be stated in error.log if not). There is one easy rule! If the error.log contains an entry, your dump is definitly broken!
Ros section is excluded from validation. Why? Itīs easy to repair, the hole section gets patched anyway and it leads to the rule above.
For NAND all known sections gets checked. But a big part is not or only rarely documented. So the hole part after cvtrm, cell_ext_os_area, OtherOS and unreferenced area at the end wonīt be checked. Itīs very important that you have look at the statistics and the “corrupt block count” of flowrebuilder when interleaving.
It's always recommended to check dumps manually with an hexeditor, and using other tools for validation, to be as save as possible! As long as it is not possible to decrypt the full dump, it's impossible to validate it to 100%. Keep in mind this is only beta.
Update: From sinsizer:
Added 4.46 patches
Some small changes
OFFSET: 0xF00896 --- VALUE: 0x20 --- 0x00 BLANK AREA <--this is not normal, but it doesnīt brick your console.
OFFSET: 0xF20020 --- VALUE: 0x000002000000004000000000 --- CELL_EXTNOR_AREA <--- you can find this check in line 1522, add this value or delete the check.
Update 2: Changelog: minor changes to the GUI (allows adding new patches to the patch folder). Thx to 3absiso and ChazLJ for testing.
Extract CORE_OS_PACKAGE.pkg with pupview.exe from the firmware.pup.
Unpack/decrypt the CORE_OS_PACKAGE.pkg with fwpkg.exe
Copy the new file to the patch folder.
You have to use "ros" somewhere in the name. Otherwise it doesn't get recognized as patch.
Update 3: From sinsizer: The tool patches now ros and rvk if a corresponding rvk patch is placed in the patch folder. If no rvk patch is found, it will only patch ros.
Naming convention for patch files:
In the example you can see that it will patch ros and rvk for nor. For nand it will patch only ros, because the revoke patch has another name. All patch files have to begin with the red names.
The tool will be released without patch files from now on. You can download the patchfiles here: ps3coredump.eu5.org
PS3 Coredump - All Files are in readable format! (000000000FACE0FF00000000DEADBEEF) or (IFI)
All tools, which use these files, should automatically detect the input format and swap the byteorder, if needed.
In future updates a small downloader will be integrated, as well as some other features regarding c2d and keyextraction from eid.
PS3 NOR/NAND Statistic Download: [Register or Login to view links]
From Swizzy on the Win XP port (linked above): What I did was download the latest one then I decompiled it and fixed a few minor decompilation errors and re-compiled it with .net 4.0 as target instead of .net 4.5. I tested to make sure it runs in Windows XP on one of my virtual machines, however... I didn't check that all checks etc. are ok, but they should be.
Hi, I flashed my ps3 back to original dump but I am getting no signal from hdd or usb what can I do I verified my dumps with ps3 flash tool and bwe nor validator 1.31 all was fine my ps3 model is cechk01.
Can you please verify for us that your power cable connector is properly inserted into the connector. Usually the gold contacts have a hard time making the proper connection. Please let us know if you even get the stanby (red) light.