After you flash nor, you need to install dex firmware via service menu with lv2diag.self (like in old 3.41 downgrade methods).
thats why i asked ... you've tested this/installing DEX in recovery after flashing back?
if one is on cfw355 i've heard jaicrab preloader can be used to flash this back? or is a hardware flasher required, only for 3.60++ if the backup/restore function works from preloader on cfw355 and not only that 365cfw?
The first 16 bytes of decrypted EID0 Section should match the first 16 bytes of the EID0. If not, STOP!
yes the IDPS/16 bytes, thats the one for total verify right if correct? my dump matches up idps
check in original cex dump (with modified TargetID - 82) - offset 002f070/EID0 - first 16 bytes = IDPS
must match up with decrypted eid0 (eid0_dec.txt - open/use with HxD) first 16 bytes (IDPS)
original IDPS = cex targetID e.g 0085
for NOR, preloader should work? nice, i have e3 flasher, if preloader can do the job why not .. all the e3 hassle, not to sure of preloader either haha or is it real buggy? thx