Sponsored Links

Sponsored Links

Page 24 of 62 FirstFirst ... 14222324252634 ... LastLast
Results 231 to 240 of 619



  1. #231
    Senior Member smokyyuwe's Avatar
    Join Date
    Sep 2011
    Posts
    113
    Sponsored Links
    Sponsored Links
    So, Kotaku sent the cex2dex information to Sony. I hope someone decides to make this process super easy, but it looks like this will be our next "cfw" thing...

    Source: kotaku.com/5926928/has-the-ps3-been-hacked-again

  2. #232
    Registered User roygaard's Avatar
    Join Date
    Dec 2008
    Posts
    2
    Sponsored Links
    Sponsored Links
    You'll never be able to umount a device when you're using it - so it's safe to type in following command:
    Code:
    cd
    "cd" without any parameters (normally) will set your working-directory to the users home-directory.

    using the "mount"-command you should be able to find the device mounted to some directory. So simply type:
    Code:
    sudo mount
    and search the output for the device.

    if the device is mounted - simply umount it now ... it should work.

    if it's not mounted - check "sudo dmesg" (hope this command is available on RedRibbon Linux). there should be some notifications for the USB-device-plugins (incl. the device-name sda1 or such).

    BR,
    Roy

  3. #233
    Senior Member Foo's Avatar
    Join Date
    Sep 2011
    Posts
    332
    Sponsored Links
    Sponsored Links
    Debug Agent Version 4.20... O.o

    I wonder what the firmware is on DECR units? If they have the update or not.

  4. #234
    Registered User Leussink's Avatar
    Join Date
    Jun 2012
    Posts
    4
    Thanks, the beginning works... But if i came to: sudo make

    I got command not found.

  5. #235
    Senior Member niwakun's Avatar
    Join Date
    Jun 2009
    Posts
    530
    It can be done on simple Linux script.

    Just like when you run an app in PS3, a linux will launch and will do its task automate, with some confirmation and checks to ensure that the process is done flawlessly.

    But the conversion of CEX into DEX dumps is not yet possible in linux, but it can be done, just no one takes action onto it.

  6. #236
    Member anon777's Avatar
    Join Date
    Jan 2011
    Posts
    67
    I'm having trouble dumping the NAND (FAT 256 NAND) via preloader advance 3.1 in the description it says "Using Preloader Advance 3.1 (JFW is NOT required) I put my PS3 into service mode, put Lv2diag.self and the advance.cfg on a memory stick and put it into USB000 (far right slot). Powered the PS3 on and let it do its work."

    and i did exactly that but when it finished i didn't have any new files on my usb what am i doing wrong?? (rebug 3.55.2)

  7. #237
    Senior Member Foo's Avatar
    Join Date
    Sep 2011
    Posts
    332
    So seeing how it a pain to type your dir into CMD and etc... I came up with a simple batch for using the compiler.

    Within that file is the batch and the pkg compiler (Property of d0zs)

    Just place the batch and compiler into BLES/BLUS/NPIA folder and presto

    Link: [Register or Login to view links] ^-^

    (attached the wrong file the first time )
    Last edited by Foo; 07-19-2012 at 12:34 AM Reason: Automerged Doublepost

  8. #238
    Member anon777's Avatar
    Join Date
    Jan 2011
    Posts
    67
    never mind i know what i did wrong!

  9. #239
    Registered User germainm's Avatar
    Join Date
    Dec 2010
    Posts
    5
    i get serious problem converting my cex 3.55 to 3.55 dex

    first, i dumped my flash to get the key for the metldrpwn exploit
    second, i get the 48 bytes key for cex2dex with metldrpwn
    third, i used cex2dex. got no problem

    i got a new flash.bin
    i've flashed this flash.bin with dd (in petitboot)
    after, i rebooted (and wanted to install a 3.55 dex in recovery)

    the problem is that the ps3 don't want to format the hard drive : always throwing error 8002f271. i've tried to reformat in my computer in fat32 and replugged it but the problem was not fixed

    so, i put the ps3 in service mode (with my atmel chips) and the software psgrade flashed on the chip. i used the lv2diag.self used with psgrade and ps3updat.pup from 3.55 dex but without success. in UPDATER_LOG.TXT i get
    Code:
    manufacturing updating start
    PackageName = /dev_usb000/PS3UPDAT.PUP
    settle polling interval success
    vflash is enabled...
    creating system regions...
    create storage region: (region id = 1)
    create storage region: (region id = 2)
    format partition: (region_id = 2, CELL_FS_UTILITY:HDD0, CELL_FS_UFS)
    create storage region: (region id = 3)
    format partition: (region_id = 3, CELL_FS_UTILITY:HDD1, CELL_FS_FAT)
    creating system regions done.
    boot from nor flash...
    creating nor flash regions...
    create storage region: (region id = 2)
    create storage region: (region id = 3)
    creating flash regions...
    create storage region: create region failure(error = 0x8001000c)
    create_region() failure = 0x8001000c
    create storage region for Flash failure
    setup_storage_regions() failure
    manufacturing updating FAILURE(0x8002f0e0)
    Total Elapsed time = 11221 msec
    so, could someone help me with that?

  10. #240
    Contributor segobi's Avatar
    Join Date
    Aug 2010
    Posts
    14
    dex 4.1 working perfectly now

    To get make, insmod etc. working - i installed red ribbon rc5 to hdd then you need kernel sources and recompiling the kernel did the trick:

    on linux (booted from your hdd not iso!) do this minus the quotes:
    Code:
    "sudo passwd root"
    choose new root password
    Code:
    "su"
    login as root.
    Code:
    apt-get update
    apt-get install make
    apt-get install wget
    apt-get install gcc
    apt-get install libncurses5-dev
    
    wget [Register or Login to view links]
    tar xvfz linux-2.6.tar.gz
    rm -rf linux-2.6.tar.gz
    
    ln -s /usr/src/linux-2.6 /lib/modules/2.6.38-powerpc64-otheros/build
    
    cd linux-2.6
    cp ps3_linux_config .config
    make menuconfig
    
    make
    make install
    make modules_install
    add this line
    Code:
    test=/boot/vmlinux root=/dev/ps3dd1
    to
    Code:
    /etc/kboot.conf
    go to /boot/ and rename vmlinux-2.6.39 to vmlinux

    restart ps3 into petitboot and boot test=/boot/vmlinux root=/dev/ps3dd1

    now proceed with the methldrpwn script like in the other tutorials etc.

    edit: you can skip:
    Code:
    ln -s /usr/src/linux-2.6 /lib/modules/2.6.38-powerpc64-otheros/build
    Last edited by segobi; 07-19-2012 at 03:56 AM Reason: Automerged Doublepost

 

Sponsored Links

Page 24 of 62 FirstFirst ... 14222324252634 ... LastLast
Affiliates - Contact Us - PS3 Downloads - Privacy Statement - Site Rules - Top - © 2014 PlayStation 3 News