Spansion S29GL128N & DIA-001 for PlayStation 3

[mushy409]

After 3 days of intensive head-scratching, and speaking with a certain person I now bring you the 100% sure way to dump/erase/write this Spansion N NOR flash (DIA-001)...

Firstly, connect your progskeet to the USB and run 'zadig.exe' - then select "Libusb0" as the driver to install for your progskeet device

THEN you need to use Winskeet4000-111004 to dump/erase/write (NOT the newest 111205)

SIMPLE!!! Credits to domelec for sharing the 'secret' - no really, a big thanks!

One thing to note - this isn't made clear anywhere... You can only use the WinUSB driver & Winskeet 111205 IF you have updated your Bitstream!!! Otherwise, use the older flasher & stick with the Libusb0 driver.

Questions welcome!

[muqset101]

Dude... come on the irc regularly .. anyways i got a dia-002 i'm going to try what you said lol.. my ones not getting detected ... going to rewire

[racer0018]

God this chip is a pain in my butt. I can't get to to take a flash no matter what.

[bluray91]

Hi is this solderless? just wonder if i shall get a progskeet or e3flasher.

[racer0018]

You can use an e3 on it. However I would suggest that, I have seen so many ps3s that have been bricked because of the e3. I would say get a progskeet, it will work with more systems. Thanks