ok, im lost. i copied my cellftp.self to my work dir, but im still not connecting with the -nodebug command. im not seeing any activity in my dtccons window, and i also get a \spu attach\ window. can anybody guide me back to the light.[IMG]http://img203.imageshack.us/i/dsktpx.jpg/[/IMG]
ok, im lost. i copied my cellftp.self to my work dir, but im still not connecting with the -nodebug command. im not seeing any activity in my dtccons window, and i also get a \spu attach\ window. can anybody guide me back to the light.
If the SPU attach window shows a Process ID (vs an error), press enter a few times in the dtccons window as at times the COMMAND> prompt will not show up.
spu attach says connected to dcm ,but dtccons says no deci3 manager
Ok, your issue is dtnetm - namely, it should say "connected to target". Shut the PS3 down, turn it back on - then re-run dtnetm (with the PS3's IP) , and give it another try!
it may be the fact that in wireless, but my debug unit shows my ip addy is connected.
spu window shows " connected to dcm", and when i hit enter in the dtccons window, all i get is no deci3 manager
Yeah, connected to dcm is output by dtnetm basically - since DTNETM does not have a connection to your PS3, it wont work. It has to say connected to target, or you will have lots of problems!
it may be the fact that in wireless, but my debug unit shows my ip addy is connected.
spu window shows " connected to dcm", and when i hit enter in the dtccons window, all i get is no deci3 manager
I've had this error before. Make sure dtnetm is connected first. I would use wired connection if you plan to dump your game. Make sure "DTNETM=127.0.0.1" and run "dtnetm -d your_debug_ip", then you should see a window pop up saying it's connected. Let's assume you are on windows version of dtnetm and cellftp.self is in the root of your c drive.
Remember / is your home directory which maps to /c/msys/1.0/.
Do the following command within msys command window:
cd /home/YOUR_USERNAME
mkdir work
cd work
cp /c/cellftp.self /home/YOUR_USERNAME/work
then run "bedbg -prepare" and "bedbg -nodebug cellftp.self" that should solve your problem.
i just re installed everything, now it says connected to target. CJ is the MAN!!!
just ran cellftp, & im getting an error in my spu window.. can anyone guide me back to the light?
Originally Posted by zhixiang
Remember / is your home directory which maps to /c/msys/1.0/.
Do the following command within msys command window:
then run "bedbg -prepare" and "bedbg -nodebug cellftp.self" that should solve your problem.
just seen your post zhixiang, i'm gonna try it now. good looking out
Originally Posted by zhixiang
I've had this error before. Make sure dtnetm is connected first. I would use wired connection if you plan to dump your game. Make sure "DTNETM=127.0.0.1" and run "dtnetm -d your_debug_ip", then you should see a window pop up saying it's connected. Let's assume you are on windows version of dtnetm and cellftp.self is in the root of your c drive.
Remember / is your home directory which maps to /c/msys/1.0/.
you called it, its up and running. Kudos Zhixiang
Last edited by imtoodvs; 04-05-2010 at 10:58 PMReason: Automerged Doublepost
i am new here and got my hands on a ps3 test cecha00a luckily. iam on fw 3.20 and can if i get those files downgrade to 1.00. hopefully this files leak. i want to make some research. backup up some games and so on. very good guide here but i went in to trouble. maybe someone can help me out please.
Originally Posted by imtoodvs 
can someone help me out please! 
