i've tried everything to downgrade but nothing works. I don't know what to do. Can you try to upload your version of my nand again? i would try it with that one. Believe me, i tried everything to install a 3.55 firmware but with no luck. I think i have a mistake in my patched Nands. If you can upload them again i will try that one.
I´m sorry that i'm wasting so much time of you. Believe me, first of all i try everything on my own, but i can´t step forward now.
Edit: I can do what i want, but the usb doesn't work. The LED from the stick shows no reaction.
Last edited by kiki1234; 01-27-2012 at 12:09 PMReason: Automerged Doublepost
Thank you for uploading the the patched nand dumps. I have tested them with the same results as i had. Ylod. I've tried everything at the weekend. I found out that i only have the green and black screen when i flash back in vise-versa. Thats why there is no usb function.
Then i reinstalled 4.0 firmware via usb and Service Mode. Read out again, patched the files (1patchcos355.bin), flashed back ---> Ylod
Then i saw that the 2patchtrvk.bin is exactly the same as in my original Dump. So, that say to me, that i didn't need it.
Then i tried the 1patchcos.bin bin with the new dump (new 4.0 firmware) ---> Ylod
I flashed back the original new dump, the ps3 is working fine.
I go to service mode shut down the ps3, read out the nands, patch the files, flash back ---->Ylod
(everytime when i rescramble with flowrebuilder i have a look if all folders and files were created (bootloader cCSD, cISD etc...)
Ok, you see, i've tried everything. I really want to open the window through out the ps3 and forget about everything i have ever done with it
Maybe you have one more idea. If everything went well, i buy a ylod ps3 (same model as mine) in the evening then i will fix the ylod and try and this one. Only to see if its the firmware of the ps3 that make the problems or am i the problem
I forgot to tell you, that i'm using the Progskeet with winskeet. But i think that can't be the problem, because when i flash back the originals dumps, the ps3 is working well.
Ok, thats it from my side. Maybe you have one more idea, if not you will here from me when i have a second ps3 for testing here.
Again big thx to Mushy for helping.
Edit: I have compared your patched files with my patched files and they are the same. So that shows me, that i didn't do mistakes at the patching part. I think that my firmware isn't "compatible" with this patch but then i were the first one i think. I get no silence in my head
Last edited by kiki1234; 01-30-2012 at 07:13 AMReason: Automerged Doublepost
Because the method used for downgrading NAND/NOR consoles is slightly different.
Kiki - I'd more than likely say it's down to a hardware problem (with your progskeet). Reason I say this is becuase I've had nothing but trouble with mine since I bought it (v1.1 Crystal Blue). Even with the new bitstream - I cannot program both NANDs as I have to solder flash0 to NAND1 on progskeet, read then write, then solder flash1 to NAND1 on progskeet as for some reason I get 2 dumps of the first NAND.
VERY buggy software, although worth perseverance because of the write speed
Hey Mushy, i know you can't read out two nands at the same time. I read and write every Nand on its own. I thought so too, that the progskeet has a failure. But the misterious think is, when i flash back the original Nands the Ps3 is working fine.
This week i get a 2. ps3. I will test it with the other ps3. When its done, i will let you know
Thx men, but i have to get it on my on The good thing is, i can't destroy it anymore, because i have a working dump I will give it some more trys. First of all i try an other ps3 with the same process, because it is the right one. I know, because your patched dumps from my dump are exactly the same as my patched dumps. I compared them with HxD.