Yeah, I've renamed them vice-versa and re-interlaced and you now have a good 256Mb NAND dump with console specific areas extracted. I'll upload the image when I get home, need to pop out now.
If you don't want to wait, try it yourself. Rename NAND0 to NAND1 and vice-versa, then re-interlace. When flowrebuilder has done, you should have a folder that contains your EID, METLDR, BOOTLOADER0 & 1, VTRM, etc. A bad dump/bad extract yields only 2 files in the extract folder (even tho there is no error)
Give it a try! If you get stuck, I have your pre-patched NAND image on my flashdrive. I'll upload it when I get home
Nice to hear that you like Updates, i have a new one for you
There is no way to get into the Service mode for me. The ps3 is starting green light, black screen but it didn´t go off after 20-30 secs. Is it right? because in the Tutorial is written that the ps3 is going off after 20-30 secs.
I have tested the ps3 key to get into the service mode. No usb sticks (incl. ps3key) are running not even the led's form the sticks are burning. Did you have a answer for me?
Edit: Ah ok, i don't need to go in the factory mode. I only need L2diag.self (Jaicrab) with Nocheck255.pup with a normal usb stick. I've tried a .pup file which have no "nocheck". Maybe there is the problem. Ok then i will try it. Hopefully it work.
Last edited by kiki1234; 01-26-2012 at 05:59 PMReason: Automerged Doublepost
When your PS3 is sat with the green LED and DOES NOT power off after 20-30 secs, you DO NOT need service mode dongle ONLY LV2Diag file.
If it turns off after around 20-30 secs, you need your Service Mode dongle in one USB, your flash drive with LV2DIAG.SELF & PS3UPDAT.PUP (355checkoff.pup - rename this) in the other USB on your PS3.
Turn your PS3 OFF at the mains, then on, press POWER then EJECT - your PS3 should power up, read from the dongle then power OFF. Remove your Service mode dongle & leave your flash drive in & power back up. It should then begin the Factory Service Mode downgrade.