Sponsored Links

Sponsored Links

Page 14 of 16 FirstFirst ... 41213141516 LastLast
Results 131 to 140 of 155



  1. #131
    Senior Member mushy409's Avatar
    Join Date
    Oct 2008
    Posts
    329
    Sponsored Links
    Sponsored Links
    Yes you can, the downgrade works for 3.6x, 3.7x, 4.00 & 4.11 - tried and tested many times

  2. #132
    Member JW117's Avatar
    Join Date
    Aug 2009
    Posts
    48
    Sponsored Links
    Sponsored Links
    How long does it take to downgrade to 3.55 from 4.11?

  3. #133
    Senior Member mushy409's Avatar
    Join Date
    Oct 2008
    Posts
    329
    Sponsored Links
    Sponsored Links
    Depends how quick you are at soldering really, unless you use the solderless clips. Most of the time is spent waiting for the NANDs to read/write. If you know how to use Hexeditor then its pretty straight forward

  4. #134
    Senior Member mushy409's Avatar
    Join Date
    Oct 2008
    Posts
    329
    Sponsored Links
    Sponsored Links
    Or Better still... forgot about this tool - Venix Downgrade GUI

    This app patches both NOR & NAND images ready for downgrading. Saves the hassle of hexing the patches!
    Attached Files Attached Files

  5. #135
    Junior Member theinfinite's Avatar
    Join Date
    Nov 2011
    Posts
    50
    Mushy409 Can the single/dual NANDs on the fat ps3 motherboard be replaced? If so, will the ps3 be operational? I would think so since the things are brand new and would need to be flashed with any firmware since they're empty, right? Just wondering.

  6. #136
    Registered User kibash23's Avatar
    Join Date
    Jul 2012
    Posts
    2
    is there any hope for version 4.21?

  7. #137
    Registered User class's Avatar
    Join Date
    Jul 2005
    Posts
    4
    hi, i hope you can help me. can you fix my 5 bad blocks in nand 0 and my 2 bad blocks in nand 1 .. tried to dump them 5 times but always the same .. (wanikoko v1 brick)

    links for the files : [Register or Login to view links]

    any one ?!? help please

  8. #138
    Registered User cbr600's Avatar
    Join Date
    Apr 2007
    Posts
    2
    hello all... I have 3 bad blocks after nand0 dump using infectus double nand programmer v1.41. Tried 6x with the same results. No issues with nand1. When I use the infectus programmer, i don't receive any errors for both nands. I checked the wiring many times and the solder points are good. Before I proceed, could someone provide some insight. (wanikoko v1 brick)

    Below is the error log report for nand 0. If needed, i will upload the files for further review...
    Code:
    ------------------------------------------------------------------------
    START DUMP READING PROCESS: 08/21/12 (20:57:18) - PS3 DNP 1.41
    ------------------------------------------------------------------------
    
    > Read cycle #629/1024, NAND Bad Block #1 found at Address: 84885504 (dec)
    
    > Read cycle #832/1024, NAND Bad Block #2 found at Address: 112324608 (dec)
    
    > Read cycle #916/1024, NAND Bad Block #3 found at Address: 123678720 (dec)
    
    > Flash0 NAND dump saved on file: C:\Users\Sal\Desktop\flash0 bk
    
    ------------------------------------------------------------------------
    END DUMP READING PROCESS: 08/21/12 (21:12:37)
    ------------------------------------------------------------------------
    
    ------------------------------------------------------------------------
    START DUMP READING PROCESS: 08/21/12 (21:54:29) - PS3 DNP 1.41
    ------------------------------------------------------------------------
    
    > Read cycle #629/1024, NAND Bad Block #1 found at Address: 84885504 (dec)
    
    > Read cycle #832/1024, NAND Bad Block #2 found at Address: 112324608 (dec)
    
    > Read cycle #916/1024, NAND Bad Block #3 found at Address: 123678720 (dec)
    
    > Flash0 NAND dump saved on file: C:\Users\Sal\Desktop\flash0 bk1
    
    ------------------------------------------------------------------------
    END DUMP READING PROCESS: 08/21/12 (22:09:48)

  9. #139
    Registered User psxforums's Avatar
    Join Date
    Aug 2012
    Posts
    2

    thanks

    thank you for the great tutorial

  10. #140
    Member Siggy12's Avatar
    Join Date
    Oct 2009
    Posts
    112
    excellent guide mushy409.. but I have a question that you probably know the answer I don't think that no one have tried this but i cannot read anything anywhere that maybe can lead us to downgrade easily a 4.21 console without a flasher, so here my question...

    Now that we have the 3.60 keys is not possible to sign jaicrab LV2DIAG.SELF for work also on 3.60 and up to 4.21 firmware for exit from factory service mode ? if this work maybe we can downgrade easily no ?

 

Sponsored Links

Page 14 of 16 FirstFirst ... 41213141516 LastLast
Affiliates - Contact Us - PS3 Downloads - Privacy Statement - Site Rules - Top - © 2014 PlayStation 3 News