How to Use an XBox 360 NAND Reader to JailBreak Your PS3
I modified the original tutorial
to make this one 100% NOOB-Friendly! Step 1:
Download the compiled USB SPI hex code
. Step 2:
Install the Microchip USB package
. After you have it installed, you should have a menu created something like: MicroChip ->MCHPFSUSB v1.3 in your windows menu bar. Please also remember the install location of this package, as you need to install drivers later. Reboot your machine.
Now, open the TIAO 360 USB SPI interface package, use the jumper to short the BL pins as shown below:
Then, connect it to your PC using a mini USB cable. You will see the PWR light is on, and you should also hear a beep from you pc indicating a new hardware is found. If you have already installed the microchip driver, then please skip to Step 3.
Follow the steps to install the driver:
A window will open, choose Install from a specific location. Click Browse. Browse to the package you downloaded, and expand MCHPFSUSB, then expand PC and then expand MCHPUSB Driver, click on the Release folder and press OK. Then press next and done, you installed the driver. Step 3:
Open PDFSUSB.exe to load the firmware to PIC. Select your NAND Reader. Press on Load hex file, and browse to the hex file I uploaded, and press Program Device. You have successfully programmed your device. Step 4:
Remove the jumper from your NAND Reader, and your ready! Step 5:
Plug it into your PS3 through the mini-USB cable.. TADA!