Sponsored Links

Sponsored Links

Results 1 to 6 of 6



  1. #1
    Registered User macanazo's Avatar
    Join Date
    Sep 2010
    Posts
    6
    Sponsored Links

    Post How to JailBreak PS3 with Blackcat USB

    Sponsored Links
    How to JailBreak PS3 with Blackcat USB

    Requirements:
    PS3 (on fw 3.41)
    Blackcat USB
    Flip Software (i used 3.3.1)
    Psgroove Teensy 1.0 Hex file w/ Manager.pkg
    Manager.pkg file
    External USB Drive
    Original PS3 Game Disc

    1) Put the Blackcat USB in DFU mode by flipping both switches to the 1 an 2 positions.

    2) Push the button on the board and look at Device Manager, if it shows up as AT90USB162 you're in DFU mode.

    3) Open Flip and select target device AT90USB162.

    4) Now go into Settings and select a communication medium, choose USB. Your Blackcat's info should show up.

    5) Go to File, hit Load Hex File, and choose the Teensy 1.0 hex file.

    6) Erase, Blank Check it, and write the Hex file onto the chip.

    7) Hit the verify button to make sure it went through ok, if so just hit the "Start Application" button.

    8)
    Load the Manager.pkg onto the external drive. (Formatted FAT32)

    9) Go to your PS3 and do a complete power cycle. (Turn off completely with switch on back.)

    10) Plug in your Blackcat USB, turn on the switch in back.

    11) Power on your PS3 and hit the eject button immediately. (This is the part most people mess up.)

    12) If you did it right, you will have two folders on your XMB. One that says "Install Package Files" and another "/app_home/PS3_GAME/".

    13) Plug in your USB drive with the Manager.pkg file. You should now see it in the "Install Package Files" folder. Run it. You should now have Package Manager installed.

    14) Install your original PS3 game and run Package Manager. It will ask you whether you want to load it or back it up. Back it up!

    15) After a few minutes you'll have a copy of the game showing up. Select it and it will load it to the XMB menu.

    16) Hit the game icon and Play!!! ENJOY!!!
    Attached Files Attached Files

  2. #2
    Forum Moderator PS3 News's Avatar
    Join Date
    Apr 2005
    Posts
    27,811
    Sponsored Links
    Sponsored Links
    Thanks for the guide macanazo and +Rep!

  3. #3
    Senior Member Pcsx2006's Avatar
    Join Date
    Feb 2009
    Posts
    326
    Sponsored Links
    Sponsored Links
    Nice guide macanazo and +rep also.
    Last edited by Pcsx2006; 09-02-2010 at 10:48 PM

  4. #4
    Registered User macanazo's Avatar
    Join Date
    Sep 2010
    Posts
    6
    Just to let you guys know, this works on both x32 AND x64bit version of Windows 7. There's no need for VMware.

  5. #5
    Registered User djtoxic's Avatar
    Join Date
    Jan 2011
    Posts
    2
    great guide, many thanks

  6. #6
    Senior Member OGroteKoning's Avatar
    Join Date
    Sep 2009
    Posts
    491
    This guide is very old albeit extremely useful at the time. And it seems like you are going to jailbreak ypur PS3 in an "old fashioned" way.

    Have you considered installing CFW rather than having to put up with power-cycling the PS3 all the time? Good luck

 

Sponsored Links

Tags for this Thread

Affiliates - Contact Us - PS3 Downloads - Privacy Statement - Site Rules - Top - © 2014 PlayStation 3 News