OK guys, i finally got Dead Space 3 DUPLEX release WORKING!!! The previously disappeared saves have now magically appeared! Here is what i did: Upgrade from CFW KMEAW 3.55 to REBUG's latest CFW 4.30.1.
To help you out with the CFW upgrade, simply follow these 2 easy guides in the given order:
Then, you need to replace the CFW 3.55 patched eboot.bin file with the original eboot.bin file in that path: \BLUS31053-[Dead Space 3]\PS3_GAME\USRDIR
Next, fire up the updated Multiman on your upgraded CFW 4.30 PS3 and load the game. Make sure you have any game disc in the PS3.
However, i am having trouble installing the DLC unlocker released by DUPLEX. I need the download link for the official (unmodified) patch 1.01. Can someone please provide a link for that patch? I need the patch for the US release (DUPLEX is US release: BLUS31053).
Thank you and i hope these instructions help!! There is really no need to stick to CFW 3.55 folks! And the info i have provided in this post allows you to easily downgrade back to CFW 3.55 whenever you want!
OK, i found it!! Not easy at all!! Here is the official patch 1.01 for Dead Space 3. You'll need to install this before you can install the DLC unlocker: [Register or Login to view links]
Tomb Raider BLES01780 (Proper Fix) for 3.41 to 3.55 by Daveyshamble501
Hi guys, Here is my fix for Tomb Raider BLES01780 for everyone one 3.41 to 3.55. It has been tested by me on Kmeaw CFW 3.55, I was using SEN Enabler/Disabler spoofing 4.31 but I don't think that will matter for those of you that havent got it, As I have spoofed the PARAM so it should boot... If not then try SEN Enabler/Disabler or 99.99 firmware spoofer for 3.55....
Please report any problems in the comments, If you dont have a copy of either of the spoofer's please say so as I do and I can link them for those of you that need it... Thanx...
From harryoke: People will need the spoofer as you didnt change the second param_sys check in the eboot.bin if you decrypt the eboot with scetool then look in a hex editor for this string 24 13 BC C5 F6 00 33 00 00 00 and simply change the 2 numbers after the last 00's to 33 it should boot on any cfw.
The easiest way to do this is run the game through Multiman and let it fix the files... then grab the eboot and resign and it will already have the param_sys check fixed.
Black screen fix and error code. For those who want to play without a disc in the drive here is my modified eboot.bin for 4.30 all you have to do is enable bd mirror and set premissons you will also have to download this pkg file its a patch for 4.30 tomb raider sorry for my english peace out. This is for people with error code 80010009 and black screen !