Having problems with Lego Star Wars & Ford Racing 3

[AceMgg]

Can't seem to get these 2 to load. The Lego Star Wars gives me the RSOD and i tried cd loader but still don't work. And ford racing 3 gets to the load screen and then it does nothing. Tried cd loader on them to but no go. I'm using cog swap-cd loader-game. My swap magic cd 2.0 does not work in my v10. Any help would be great

[Taktloss]

have you tried DVD loader ?
if not try it!!

[watsupdoc]

If you are using cogswap from the memory card the TOC from the ps1 trigger disc has to be bigger than the backup ps2cd you are playing (obviously this doesn't apply to dvd's as the TOC is refreshed anyway)... i found this out this weekend after some experimentation .... driver and ff7 disc1 i found from my ps1 collection have 620mb tocs which is fine for lego starwars at 607mb

Last edited by watsupdoc; 04-12-2005 at 03:45 PM.

[bharter]

I'm having trouble with Lego SW also. I have a chipped PS2 that doesn't want to play the backup. Backup was burned at 4x, the slowest I could burn at. It is a CD based game.

[AceMgg]

Originally Posted by watsupdoc If you are using cogswap from the memory card the TOC from the ps1 trigger disc has to be bigger than the backup ps2cd you are playing (obviously this doesn't apply to dvd's as the TOC is refreshed anyway)... i found this out this weekend after some experimentation .... driver and ff7 disc1 i found from my ps1 collection have 620mb tocs which is fine for lego starwars at 607mb

Thanks for the help. Dug around and found my ff7 disc and it woked for both the games. Thanks again.