Star Wars: Battlefront

[LMJCF2005]

I did the rebuilding thing and burned it, everything's ok but heres the problem. Not a valid PS2 disc. Whats the problem? I tried 2 times at slowest speed, but no luck. So i decided to burn the whole original game (without rebuilding or changing things) and now plays fine. If SW:BF is 4.37 and SwapMagic 4.35 why it load fine and not the rebuilded one (1.80GB aprox.).

I spent 2 or 3 dvds with this one but well.

[ps2rocks]

perhasp it has lba protection? or something heh

[Rook]

I have attached a file list and a Sony CD/DVD-ROM Generator .iml/.ims file set to help you rebuild Star Wars: Battlefront (NTSC U/C). To use the .iml/.ims file set:

1. Extract all files from your game disc. It is recommended, but not mandatory, to extract these files into the C:\SW_BF folder.
2. If you would like online enabled, patch the IRX\DNAS280.IMG with a valid DNAS disc ID.
3. Plug the .iml file into IML-2-DVD v1.01. If you did not extract the files into C:\SW_BF, IML-2-DVD will ask you where the game files are located.
4. Record built .iso image to a DVD±R and enjoy.

This rebuilt image works perfectly as a direct swap from Swap Magic 2.0 DVD.

[LMJCF2005]

Sounds and loading times are OK, DCruz.


And JC, thanks for the info and tools.

BTW, the rebuilded one were burned at 2x speed, but the original one at 4x, can it be the problem?

[darnp78]

I own the an original copy of Battlefront and trying to back up as new to swap magic and trying to get used to it. I have done a straight copy using DVD Decrypter, used the swap magic DVD and used the original Battlefront to increase the TOC. The copied disc loads the main screens, however there is no sound and when I select a game, the level will start loading and then just lock up. There was a mention of a no sound problem on another post but it did not eleborate.


Thanks

Darnp

[ps2crew]

If you rebuild the image the sound issue will be fixed...Also check site utilities section the may be a patch there...

[lildarryl]

I am getting an error when i click start after loading the .iml and setting the iso filename.

The files were extracted to C:\SW_BF using apache2
The error says

Title:Microsoft Visual C++ Debug Library

Box: Debug Assertion Failed!
Program: C:\IML2DVD\IML2DVD.exe
File: fseek.c
Line: 101

Expression: stream != NULL

For information on how your program can cause an assertion
failure, see the Visual C++ documentation on asserts

(Press Retry to debug the application)

/Box End
I am then given 3 choices with lead to two outcomes
Abort with exits no questions
Retry and Ignore give me Send Error Report

I know this program works becuase, earlyer today I used it on terminator 3 and had no problems.

What could be going wrong?

Please Help

[lildarryl]

never mind guys i just used Apache2 to rebuild with the iml file

game works great, thanks for patches everyone