PSPSwampy's guide to installing 3.03 OE-C.
WARNING:
As with any tools that FLASH your firmware - you MUST
1. know what you are doing
2. Have the AC power supply connected and have >75% battery life.
3. Be SURE you are prepared to risk bricking your PSP!
Requirements:
1 x PSP with one of the following firmware versions:-
Official v1.5
Custom v2.71 SE-*
Custom v3.0 SE-*
Custom v3.02 OE-*
Custom v3.03 OE-*
(or Official 1.51 - 2.71, which will need to be downgraded to 1.5 first!)
Don't think i've missed any(?!)
1 x USB cable
1 x Copy of a
1.50 update EBOOT
1 x Copy of a
3.03 update EBOOT
1 x Copy of
3.03 OE-C For PSP
If you have a PSP with firmware 1.5 (original OR downgraded) follow the
Firmware 1.5 Instructions bit otherwise follow the
Custom Firmware Instructions bit.
Firmware 1.5 Instructions:-
1. Extract the contents of the
3.03 OE-C For PSP file to a suitable location on your PC.
2. Connect to PSP
3. Copy the
oeupdmaker,
oeupdmaker%,
303oeflasher and
303oeflasher% folders from within the freshly extracted folder onto your PSP in the X:\PSP\GAME\ folder (We'll refer to your PSP as X:\ in this guide)
4. Copy the 1.5 firmware EBOOT.PBP file into the X:\PSP\GAME\oeupdmaker folder and call it 150.PBP
5. Copy the 3.03 firmware EBOOT.PBP file into the X:\PSP\GAME\oeupdmaker folder and call it 303.PBP
6. Run the program (labelled "
3.03 OE-C Update Maker" on your PSP)
- this will automatically generate the DATA.DXAR file using the two firmware files (it will take a few mins, and will automatically close when done)
7. Copy the DATA.DXAR file from X:\PSP\GAME\oeupdmaker to X:\PSP\GAME\303oeflasher
8. Run the 303oeflasher program (Labelled "
3.03 OE-C Firmware Install" on your psp)
9. Follow on-screen instructions.
10. You are done - reboot your PSP and you should now have 3.03 OE-C installed correctly!
Custom Firmware Instructions:-
1. Extract the contents of the
3.03 OE-C For PSP file to a suitable location on your PC.
2. Connect to PSP
3. Copy the
oeupdmaker,
oeupdmaker%,
303oeflasher and
303oeflasher% folders from within the freshly extracted folder onto your PSP in the X:\PSP\GAME150\ folder (We'll refer to your PSP as X:\ in this guide)
4. Copy the 1.5 firmware EBOOT.PBP file into the X:\PSP\GAME150\oeupdmaker folder and call it 150.PBP
5. Copy the 3.03 firmware EBOOT.PBP file into the X:\PSP\GAME150\oeupdmaker folder and call it 303.PBP
6. Run the program (labelled "
3.03 OE-C Update Maker" on your PSP)
- this will automatically generate the DATA.DXAR file using the two firmware files (it will take a few mins, and will automatically close when done)
7. Copy the DATA.DXAR file from X:\PSP\GAME150\oeupdmaker to X:\PSP\GAME150\303oeflasher
8. Run the 303oeflasher program (Labelled "
3.03 OE-C Firmware Install" on your psp)
9. Follow on-screen instructions.
10. You are done - reboot your PSP and you should now have 3.03 OE-C installed correctly!
Installing Plug-ins (once the above has been done!):-
1. Create a folder on the root of your PSP called seplugins
i.e. X:\seplugins\
2. Copy your plugin PRX files into this folder (i'm using cwcheat.prx for an example)
3. Within the folder create two files "game.txt" and "vsh.txt" and within these files enter the location and name of your Plug-ins (e.g. ms0:/seplugins/cwcheat.prx)
4. Save the updates to the text files
5. Hard reset your PSP and then enter recovery mode (by powering back up and holding the R button
6. Inside the recovery console, goto "Plugins ->" and then turn on/off your plugins!
That's it - you should now have a PSP with 3.03 OE-C installed and working!
(Uninstaller Tutorial coming soon)
PSPSwampy
Ok - if you find this guide useful,
do NOT reply with a thank-you message -
instead please click the 
icon to the left (under my username! on this post)
Last edited by PSPSwampy; 03-03-2007 at 10:41 PM.