Today PSP Custom Firmware 5.03 GEN-A for HEN has been released, which includes support for PSP-3000 and PSP-2000 v3 consoles, PS1 games, PSP back-ups, GEN VSH and Recovery Menus and access to PSN.
Download: http://www.megaupload.com/?d=2PTE0ANX / http://www.zshare.net/download/61045131ce041b21/ [Mirror]
An installation video is below, and from the included ReadMe file:
1. Connect your PSP to the computer in USB Mode when you have loaded ChickHEN R2.
2. Unzip 5.03GEN-A_for_HEN.zip on your desktop by example
3. double-click on LAUNCH-ME.exe (GUI)
4. PSP Model: choose options PSP-2000 or PSP-3000 (depends of your PSP)
5. Mode: Choose option FULL
6. PSP Install : Choose option YES
7. push START.
8. the files are copied on your PSP.
9. Disconnect the PSP from USB.
10. Launch the main EBOOT.PBP using ChickHEN R2 (only R2! NOT R1!).
11. When the app load, press L or R to flash the firmware in your flash. YOU ONLY NEED MAKE IT ONE TIME!
12. Press () to reboot in the custom firmware.
NOTES:
- When you installed the custom firmware in your flash you can remove the "files" folder in the MS ROOT. For your own safety, is better that you rename or erase the prx called "flasher.prx" in the MAIN APP folder to avoid wrong flash times.
- If you shutdown the machine or the psp crash, you will need use again ChickHEN R2 to load the main app and press O to reboot in the custom firmware, but if you dont shutdown the machine you are in the custom firmware forever.
BUGS:
- In recovery mode after the option "Configuration" the option selected is the next option. For example, Advanced is CPU Speed, etc. This is a problem with the original recovery, because I dont have the code is very difficult find the problem.
REMEMBER! THIS APP DONT TOUCH ANY FILE FROM THE ORIGINAL FIRMWARE! IS YOUR FAULT IF YOU LATER CONNECT TO THE FLASH0 AND TOUCH SOME OFFICIAL FILE AND YOU HAVE A BRICK!
DONT TOUCH THEM AND NOT FLASH ANY CUSTOM THEME!
More PlayStation 3 News...