Sponsored Links

Sponsored Links

Results 1 to 3 of 3



  1. #1
    Forum Moderator PS3 News's Avatar
    Join Date
    Apr 2005
    Posts
    27,455
    Sponsored Links

    Post Guide: XBox 360 Hack - Free60 Homebrew With No Chip Needed

    Sponsored Links
    Today French site Logic-Sunrise.com (linked above) has published a guide based on the Free60 Exploit and the work of [Register or Login to view links].

    For those seeking to give it a try, to quote: "We're going to explain you the Free60 exploit, which consists in launching decrypted code (hello word) on a Xbox 360 system.

    Once this bug has been well exploited, It will be possible, in a near future, to use your Xbox 360 as a media center, and for example lauch XBMC, or homebrews (megadrive, SNES emulators, and others) and maybe Xbox 360 games from the hard disk as well, everything a Xbox 1st generation did but more powerfully !

    But before being there, there is a long way to do, even if the basis is here : it's now possible to load decrypted code on Xbox 360 system. It's been for 4years we have waiting for this huge news !

    This tutorial is written in order to explain the way to hack you Xbox 360. No chips needed !

    What you need :

    - a Xbox 360 XENON system
    - parallel port adaptater
    - NAND Pro, available here : [Register or Login to view links]
    - solder gear
    - a PC with parallel port (printer port)
    - three 330 Ohms resistances

    Let's Go ! :

    1 - 1 - Open up your Xbox 360 system

    You can find the tutorial here : [Register or Login to view links]

    2 - link the motherboard solder points to the parallel port ones :

    3 - Download and install the NAND Pro, available in download here : [Register or Login to view links] Then unzip the package, and install the port95nt.exe



    You must reboot your PC. Once on Windows, launch a CMD MsDOS (start, run, cmd, then press enter). Run in the unzipped directory : NandPro.exe, writing in the CMD : NandPro.exe lpt: -r16 nand.bin



    NandPro is going to test all you parallel ports, and recover you system Nand. Make sure you keep it
    With a parallel port, the operation can take 30mins. Once the thing is done, you should get your nand.bin, about 16Mb







    Operation success !

    Now you can Write the nand, by a hacked one (xenon_hack.bin for example), typing : NandPro.exe lpt: -w16 nand.bin

    Final

    READING WILL OVER-WRITE AN EXISTING FILE WITHOUT WARNING!
    NEW LOG FILE WILL OVERWRITE OLD WITHOUT WARNING!

    Guide: XBox 360 Hack - Free60 Homebrew With No Chip Needed

    More PlayStation 3 News...
    Attached Thumbnails<br><br> Attached Thumbnails

    1.jpg   2.jpg   3.jpg   4.jpg   5.jpg   6.jpg  


  2. #2
    Registered User thon0925's Avatar
    Join Date
    Jan 2009
    Posts
    11
    Sponsored Links

    Post

    Sponsored Links
    The tutorial is well written, but they blatantly took relapse's photo and tried to put their watermark over his without his permission. Otherwise, it's a nice guide.

  3. #3
    Registered User JeffJ's Avatar
    Join Date
    Feb 2009
    Posts
    290
    Sponsored Links
    Sponsored Links
    too bad its only the xenon boards, id live to just straight flash one of my HDMI units.

 

Sponsored Links

Affiliates - Contact Us - PS3 Downloads - Privacy Statement - Site Rules - Top - © 2014 PlayStation 3 News