Sponsored Links

Sponsored Links

Page 1 of 4 123 ... LastLast
Results 1 to 10 of 32



  1. #1
    Forum Moderator PS3 News's Avatar
    Join Date
    Apr 2005
    Posts
    27,389
    Sponsored Links

    Post Current Wii Mod-Chips and Features!

    Sponsored Links
    Update: You no longer need a Wii mod-chip, as the Nintendo Wii Backup Loader is available!

    Below you will find a list of the current Wii Mod-Chips and their Features, Install Pics, and related documentation. We will update it as new chips are available, and if you're seeking pricing or where to buy any Wii Mod-Chip then refer to our Site Sponsors for stock and comparisons on your own... do NOT post these topics in our Wii Forum.

    Direct URL to this page: http://Wii.PS3News.com

    To Chip Manufacturers: Although we're primarily a PS3 site, several of our Staff also have a Wii console and would love to review a Wii Mod-Chip sample here at PS3News.com. It would be posted in both our Reviews section and also in the Site News, so if this interests you simply Contact Us and we'll be happy to make arrangements!


    WiiNja / WiiNja Deluxe


    WiiNja v1 Hexcode (for PIC 12F629)
    WiiNja v2 [NOT Deluxe] Hexcode (for PIC 12F629)
    WiiNja Install Points
    WiiNja Installed
    WiiNja Deluxe User Guide
    WiiNja Deluxe Region Enable Upgrade
    WiiNja Deluxe NinjaShell (PAL) Adapted Version [Runs Old Viper GameCube Multi-game Discs]
    WiiNja Deluxe Upgrade 2 [Added Old Viper GameCube Multi-game Discs Compatibility]
    WiiNja Deluxe Upgrade 3 [Adds DVD9 & DVD+R DL Compatibility; Improves Compatibility with some DVD-RW brands when using on D2B Drives]
    WiiNja Deluxe / Limited Edition Upgrade 4 [Adds SUPER MARIO GALAXY Error 001 Support; Improves DVD9 and rest of medias reading]
    WiiNja Deluxe (FULL) Upgrade 4 [Adds SUPER MARIO GALAXY Error 001 Support; Improves DVD9 and rest of medias reading]
    WiiNja Deluxe Source Code

    Features:

    • Non Swap / Direct Boot
    • Boots Own Region Wii Back-ups Directly
    • Boots Own Region GameCube Back-ups Directly
    • Boots Imports GameCube Back-ups by SWAP
    • Boots All NTSC JAP/USA on NTSC Wii (Deluxe)
    • Boots NTSC Backups on PAL Wii Partially (Deluxe)
    • Boots Directly Gamecube Imports Partially (Deluxe)
    • D2B Drive Support and Improved Read Method (no DRE- Deluxe)
    • Supports all the Wii Versions/Drive currently available (Deluxe)
    • Yes, We've got the AudioFix
    • Multi-Disc / Multi-Games
    • Easy Soldering & Remove / 5 Wires
    • Support DVD-R and DVD+R (Burn +R on DVDROM Booktype)
    • Universal EUR/USA/JAP Wii Console Supported
    • Hardware DISABLE Option Using Pin3+SW2 (Poweron+Reset- Deluxe)
    • Stealth Mode
    • NOT Upgradeable
    • Recovery Mode for Bad Upgrade (Deluxe)
    • UPGRADEABLE by DVD (Deluxe)

    TESTED MEDIA:

    TDK DVD-R --> 16x -- PERFECT
    XTRA DVD-R -> 8x -- PERFECT
    IMATION DVD-R --> 16x -- PERFECT
    VERBATIM DVD-R --> 16x -- PERFECT
    VERBATIM DVD+R --> 4x -- PERFECT (Burn it DVD-ROM BOOTYPE)
    EMTEC DVD-R -->> 4x -- Produces DRE on Wii and GameCube Modes
    PLEOMAX DVD-R --> 16x -- PERFECT
    PRINCO DVD-R -- > 4x -- Not Good Perfomance






    Wlip (Spanish Chip Clip)


    Wlip Installation Manual
    Wlip Installed

    What is Wlip?

    Wlip is an adaptor that has been designed especially to install any Mod-chip in your Wii in a faster and easy way and without damage for your console, because there is no need for welding.

    You can install it yourself without any technical procedure in a few minutes. The Wlip adaptor is the answer for the demand of thousands of users who want to install a Mod-chip in their console but they just don’t trust in a complex procedure which may damage their Wii, or even drill your console for new Wiis version (with cut legs), loosing your guarantee.

    In installation we teach in a few simply steps, how to place the adaptor Wlip in your console. And to show you up how simply it is, there is a video in the demonstration section where the Wlip is installed in 10 minutes. You won’t only save time, you will also save money because Wlip is sold for only 24.95 € (the Mod-chip is not included)

    For all those advantages, Wlip has risen as the ideal way of installing your Mod-chip for Wii. Don't be deceived. It is the best solderless installation.






    Wiinner (Italian Chip)


    Wiinner Install Points

    Wiinner is a new mod-chip produced in Italy based on PIC Microcontroller (12F629) and WiiFree Code. 2-layer PCB with High Quality SMT components. It can be simply reprogrammed since it includes an onboard JDM programmer so it does NOT need an external programmer. It perfectly fits on the internal Wii's case using two hinges of original air grill and uses the air inlet holes to communicate with the external serial port (included for free). You can simply insert the serial port only when necessary (firmware upgrade).

    Just connect a serial cable to PC and use IC-Prog for further reprogramming. Cheaper, simple and functional thanks also to the reliability of WiiFree Code.





    D2CKey


    D2CKey Installed
    D2CKey Alternate Install Points
    D2CKey Install Guide v1.0.1
    D2CKey FlexPCB
    D2CKey/D2Pro Source Code

    D2CKey has been designed with user simplicity in mind. After installation (which, in all fairness, should be left to a professional!), it just works. There is no need to set up, reflash, upgrade, or fiddle around. D2Ckey automatically detects what kind of disc is inserted, and configures the drive accordingly. Original and backup original Wii and Gamecube games from different regions with the same video system boots directly, and even a lot of games from regions with different video system can be booted directly. Gamecube audiostreaming fix is built-in from the start.

    Specifications:

    • Access control LEDs
    - LED 1: disc access indicator.
    - LED 2: data patching indicator
    - Flashes smoothly during disc insertion and detection
    - Lit when backup is detected (after disclogin)
    Off when original is detected
    • DVD media compability
    - DVD+-R
    - DVD+-RW
    - Dual-layer DVD (movies and GC OS)
    • Game disc support
    - Direct boot of Wii original and backup games from the same region
    - Direct boot of Gamecube original and backup games from the same region
    - Direct boot of different NTSC region Wii and GC games on USA and JAP consoles
    - Partial region free support on Wii and GC original and backup games with different videomode (ie PAL<->USA, JAPAN)
    - Improved readsettings for recordable media
    - Supports running GC games at Wii discspeed
    - GC Audiostreaming Fix
    - Supports full-size DVD and DVD9 discs for GC homebrew
    - Supports GC multi-game discs
    - Supports Wii and GC multi-disc games
    • True stealth mode
    - Does not modify RAM, making it virtually undetectable for the Wii
    - Full command set emulation






    D2Pro (D2CKey)


    D2Pro Installed
    D2Pro Installation Manual v1.0
    D2Pro Installation Manual v1.1
    D2Pro Installation Manual v1.2
    D2Pro D1/D1A Chip Alternate Region Solder Points
    D2Pro Programmer
    D2Pro And D2Lite Recovery And Utility Disc v1.2 (D2Pro Utility included is v1.7, an Update Blocker feature has been added).
    D2Pro Firmware v1.1 Update (15-Wire)
    D2Pro Firmware v0.9b Update (9-Wire)
    D2Pro Firmware v1.0 (9-Wire) And v1.3 (15/19-Wire) Update
    D2Pro 5/9-Wire Installation Manual v1.4
    D2Pro v1.3 ConfigFlash Update Utility Disc
    D2Pro9 Utility Disc Pack v1.4 (D2Pro Utility Discs for all regions. Update will fix the SSBB issue on new d2c-2 chips).
    D2Pro9 WinXP i386 Firmware Pack v2.1 And Utility Discs v1.5
    D2Pro9 WinXP i386 Firmware Pack v2.1 Alternate
    D2Pro9 v2.3 Firmware And Utility Disc v1.6 (Works with DMS, D2A, D2B, D2C and D2C-2 chipset drives, Adds D2C-2 compatibility to previous d2pro chips that have an SPI Flash, Enables DVD update of the SPI Flash, Updatable and configurable via utility disc, Recovery Mode - can fully recover from a bad flash, Region Fallback - impossible to brick the drive by setting the wrong region, Fixes 'eject' and 'inching' issues discovered in previous firmware versions, This firmware does NOT support d2e chipsets. This update is designed ONLY for d2c and d2c-2 users experiencng either inching or eject issues. Do not use this firmware if you want to use a d2e compliant (blue sticker) d2pro on a drive with a d2e chipset!)
    D2CKey/D2Pro Source Code
    D2Pro DVD Multi-Language v1.8 Update fixes NSMB issue.

    Please note that this is a new 15-wire solution. Not to be confused with D2CPro, which is a clone of the D2CKey. It only uses 15 wires, but is reported to be as stable as D2CKey without the audiofix and DRE's. D2Pro is using the Actel A3P architecture, and is fully updatable via D2prog, an external USB programmer.

    - Supports all D2C chipset versions, including D1A
    - Supports all regions, configurable via jumpers
    - 15 wires installation (4 additional wires required for region override)
    - Direct boot of Wii and Gamecube original, import, and backup discs
    - Suberb media compability; works with most writeable DVD media,
    including DL, and factory made 'silvers'
    - Works with most 'problem' titles such as SMG and SSBB
    - Integrated Audiostreaming fix for GC games
    - Advanced error detection makes d2pro less susceptible to lockups
    and freezes compared to other low-wirecount chips
    - Fully updateable via external USB programmer
    - Rock solid performance with 1.5V FPGA core and high quality components
    Q: What is d2prog?

    A: d2prog is a tool for updating Actel A3P-family chips such as D2Pro and D2CKey.

    Q: How does it work?

    A: A flat cable connects the chip to the programmer (if supported), and a mini-USB connects the programmer to your computer. If the chip does not have a flat cable connection, soldered connections can be made to the jtag connectors on the chip. Software is then run on your computer to update the chip.

    Q: Are the cables included?

    A: Only the mini-USB cable is included. Most updateable mod-chips include a flat cable.

    Q: What operating systems will the software work on?

    A: The software will work on most popular operating systems including a vareity of Linux distributions and Mac OSX (10.4 and higher).

    Q: Can I download the software now?

    A: The software will be made available closer to the release date.

    Q: When will d2prog be released?

    A: d2prog will be released around the end of March 2008
    Wii-Clip
    Wii-Clip Installed

    Features:

    * Support all WII-D2A and D2C standard chip board, very high install efficiency, you can finish all job in 2 minutes.
    * Very easy to install, just need solder these very big pin to pin points first, then put it onto cover the D2C chip, plug and play.
    * Very easy to disable the WII chip, just need remove (pull out) the WII-CLIP from the WII motherboard, not need any soldering anymore. This way can give back you the original WII console immediately.
    * Very easy to upgrade the D2C chip, just need pull out the WII-CLIP form the motherboard, then use the new chip to replace the old one, and re-cover it onto the WII D2C chip, the upgrade job is done.





    D2Lite

    D2Lite Install Manual v1.0
    D2Lite Install Manual v1.1
    D2Lite Install Manual v1.2

    D2Lite PuddleJumper Firmware DVD v1.0
    D2Lite Firmware DVD v1.0 (Hacked)
    D2Pro And D2Lite Recovery And Utility Disc v1.2 (Official Firmware Version 1.2 aka 'Aurora'. Enables D2Lite to play other-region imports yet block other-region (or all) updates).
    D2Lite Firmware DVD v1.2 (Hacked)

    For those of you who wants to play original import Wii and GameCube games and fiddle with drivespeed and other parameters without using the somewhat complicated softmods there is now an alternative - d2lite. Features include automatic region detection and fallback, DVD firmware update, DVD config disc, recovery mode and multiple clock frequencies for greater compability with a variety of drives. It is compatible with all drives on the market and is expected to go on sale in the next week at a lite price.

    Technical Specifications:
    • Supports all known chipset versions: DMS/D2A/D2B/D2C/D2C-2/D2E
    • Just 5-9 wires required for installation
    • Region free loading of Wii and Gamecube original imports
    • Fully updatable via DVD
    • Multifrequency Ringpiece Oscillators (MRO) for optimum performance, even with problem drives
    • Selectable drivespeed
    • Automatic Region Detection
    • Recovery Mode
    • Important: d2lite is designed to modify your Wii game console. However, Wii was not designed
    with d2lite or any other mod-chip in mind. While every effort has been taken to ensure that
    d2lite is compatible with a broad range of media and drives there is no guarantee that any given
    media or game will work on a specific drive. There are a number of factors beyond the scope of
    d2lite functionality that affects media compability, such as the laser diode and other internal
    circuitry in the dvd drive.






    WiiKey / WiiKey Fusion
    BETA:

    FINAL:

    WIIKEY FUSION:

    Wiikey Fusion is a revolutionary new modchip with SD card loading capabilities. Also works on D2-3 consoles!
    WiiKey Install Manual
    WiiKey Installed
    WiiKey Config Menus
    WiiKey ORIGINAL (HASL - Silver-Colored Pads)
    WiiKey Clone Alert
    WiiKey Clone Alert 2
    WiiKey Clone Alert 3
    WiiKey Anti-Clone Original Packaging

    WiiKey Update v1.99 BETA (Multi-Region)
    WiiKey Set-Up And Configuration Disc v1.9s Universal (Issue with original Super Smash Bros Brawl discs not working fixed, It should now not be possible to render the chip inoperable by using patched config discs, DVD update blocker: A new config option to block system updates from DVD. This prevents the Wii from loading a system update for another region, Dev Mode: Remaps drive debug commands from 0xFx to 0x2x)
    WiiKey 1.9s Hexcode For ATMEGA8 Chips

    WiiKey v1.9g BETA HOTFIX Universal (USA/PAL/JAP) (Fixes Super Mario Galaxy conpatibility issue).
    WiiKey v1.9g ATMEGA8 Hexcode

    WiiKey Set-Up Disc v1.9b Universal (USA/PAL/JAP)
    WiiKey Recovery Disc v1.9b
    WiiKey Atmel Code v1.9b

    WiiKey Set-Up Disc v1.2 Universal (USA/PAL/JAP) (This release includes: WiiKey configuration, WiiKey dvdDump- dumps discs to SDCard, and some of the most popular GameCube homebrew apps).
    We have now uploaded a new version of the configuration disc image. It supports toggling features via the Reset button, so there is no need to use a GC joypad. All users that don't own a GC controller can now fully benefit from the config disc features.

    Instructions:
    - pressing RESET for a short time is same as "pad down".
    - pressing RESET >1 sec is same as "pad A".

    We are currently working on the SD Backup feature, all looks fine and we will release it during the coming week. We are carefully listening to eventual issues and will work on an wiikey upgrade which will fix them.
    WiiKey Set-Up Disc v1.1 (USA/NTSC) cfg.us [No GC JoyPad Required, Toggle Settings With Reset]
    WiiKey Set-Up Disc v1.1 (PAL) cfg.pal [No GC JoyPad Required, Toggle Settings With Reset]
    WiiKey Set-Up Disc v1.1 (JAP/NTSC) cfg.jap [No GC JoyPad Required, Toggle Settings With Reset]

    WiiKey Set-Up Disc v1.00 (USA/NTSC) cfg.us [Requires GC JoyPad]
    WiiKey Set-Up Disc v1.00 (PAL) cfg.pal [Requires GC JoyPad]
    WiiKey Set-Up Disc v1.00 (JAP/NTSC) cfg.jap [Requires GC JoyPad]

    WiiKey Set-Up Disc v1.00 (USA/NTSC) cfg.us
    WiiKey Set-Up Disc v1.00 (PAL) cfg.pal
    WiiKey Set-Up Disc v1.00 (JAP/NTSC) cfg.jap
    WiiKey Atmel Code

    Specifications:

    • Direct boot of Wii back-ups
    • Direct boot of GC back-ups
    • Direct boot of homebrew in GC mode
    • Supports all currently available console/drive versions
    • Supports D2B chipsets
    • Sophisticated (true) update mechanism via DVD (future proof, expect cool features to come)
    • Direct boot of different NTSC region Wii games/back-ups on US and JAP consoles
    • Partial support for NTSC region Wii games/back-ups on PAL consoles
    • Boots different region GC games/back-ups (partially without swapping)
    • Supports multi-disc games for BOTH Wii and GameCube
    • Supports DVD-R / true DVD+R and +RW support (no bitsetting required!)
    • Improved readsettings for recordable media
    • Built-in audio fix
    • Supports fullsize 4GB discs for gamecube homebrew
    • Stealth mode
    • 512 byte EEPROM to store configuration
    • Quicksolder interface - no wires required
    • Unique disc back-up application via sdcard
    • Compact design, best quality components, rock solid high speed controller
    • Professional ESD packing
    • Recovery mode - Can recover from a bad flash






    WiiKey 2

    WiiKey 2 Installation Guide v1.0
    WiiKey 2 Installation Guide v1.1
    WiiKey 2 Installation Guide v1.2
    WiiKey 2 Utility Config Disc v1.0 Multi-Region
    WiiKey 2 Multi-Region v1.2 Update With Config/Rescue Discs
    WiiKey 2 D2C/D2E Drive Eject Fix
    WiiKey 2 Multi-Region v1.3 Update: Odyssey Core: This fix includes a hardcoded BCA for NSMB (New Super Mario Bros) which will allow owners of original copies of this game to play their backups without any issues. There is no need to apply a patch to the .iso.

    Features:

    • Compatible with DMS, D2A, D2B, D2C, D2C-2 and D2E chipsets
    • Compatible with all regions, USA, JAP, PAL and KOREA
    • Compatible with D2B "cut pin" drives (does not require the cut pins to be connected)
    • Fully configurable and updatable via DVD
    • Advanced automatic region detection with fallback (works even if a drive is changed to a different region Wii)
    • Region override for Wii and Gamecube games
    • Direct Boot of Wii original, import, and backup games
    • Direct Boot of Gamecube original, import, and backup games
    • Direct boot of homebrew in GC mode
    • Supports multi-disc games, DVD-R, +R, +RW (no bitsetting required)
    • Supports Dual Layer
    • Supports factory made 'silvers', even with incorrect header data
    • Supports, SMG, SSBB, Mario Kart and other 'problem' titles
    • Streaming audio-fix for Gamecube games
    • Diskspeed configurable via DVD, with separate settings for different media types
    • Recovery mode makes it impossible to brick the chip with a bad flash
    • 8Mbit onboard flash for storing data and applications
    • Rock solid performance with 3.3V FPGA core and high quality components
    • Multifrequency Ringpiece Oscillators (MRO) for optimum performance, even with problem drives
    • Onboard status LEDs






    Wi-ic


    Features:

    • Wii/GC Back-up play
    • Supports multi-disc games
    • GC Import play with swap
    • GC Homebrew play
    • GC Audiofix
    • Easy install
    - Quicksolder or 5 wires
    - Gold-plated solder pads
    - Thin (0.3mm) PCB
    • Multi-Function LED indicator
    - POST (Power On Self Test)
    - Install Diagnostic and Status
    • Failsafe Update (recover after failed update)
    - Disc Channel (DVD)
    - Photo Channel (requires 1 extra wire)
    - SD Card (requires extra SD connector and 5 wires)
    • Non-volatile configuration storage
    • Optional wire for full chip disable
    • ESD (anti static) packaging
    • RoHS compliant (PbFree)

    Product Compatibility:

    Wii Console: EU/JPN/US version
    DVD Drive/Chipset: Any (currently known)
    DVD Media: DVD-R, DVD+R

    MicroSD Edition Specifications:

    • Multi-Function LED indicator
    • POST (Power On Self Test)
    • Install Diagnostic and Status
    • Failsafe Update (recover after failed update)
    • Disc Channel (DVD)
    • Photo Channel (requires 1 extra wire)
    • Non-volatile configuration storage
    • Optional wire for full chip disable
    • ESD (anti-static) packaging
    • RoHS compliant (PbFree)






    WiiBuster (German Chip)


    WiiBuster Install Points
    WiiBuster Installed

    The brand new WiiBuster mod-chip for Nintendo Wii.

    Features:

    • Plays Wii Back-ups
    • Plays GC Back-ups
    • Plays GC Homebrew
    • Plays GC Imports (swap needed)
    • Built-in Audiofix (GC games using streaming are working flawlessly, no patch needed)
    • DVD-R / DVD+R support
    • Optional chip disable wire (Stealth-Mode)

    TESTED MEDIA:

    TDK DVD-R --> 16x -- PERFECT
    XTRA DVD-R -> 8x -- PERFECT
    IMATION DVD-R --> 16x -- PERFECT
    VERBATIM DVD-R --> 16x -- PERFECT
    VERBATIM DVD+R --> 4x -- PERFECT (Burn it DVD-ROM BOOTYPE)
    EMTEC DVD-R -->> 4x -- Produces DRE on Wii and GameCube Modes
    PLEOMAX DVD-R --> 16x -- PERFECT
    PRINCO DVD-R -- > 4x -- Not good performance






    WiiMod (Spanish Chip)


    WiiMod Install Points
    WiiMod Installed

    Description:

    The WiiMod project (actually in v1.03) IS NOT a copy of the different mod-chips on the market. It's 100% Spanish.

    Features:

    • Without SWAP, runs directly
    • Boots Wii and Gamecube back-ups (Own region at this time) + Audiofix
    • Boots Imports Gamecube back-ups by SWAP
    • Multi-disc / Multi-games
    • Stealth Mode
    • WiiMod is not upgradable

    Wii Models: USA/EUR/JAP Supported (Panasonic DVD Firmware)
    DVDMedia: Working with DVD+/-R (+R with booktype)
    Soldering: 5 wires






    Wiip


    Wiip PCB Gerber Files

    Wiip is a hardware mod for the Wii system that allows you to boot back-up discs. This Mod works by utilizing a cheap and simple microcontroller that communicates with the serial port of the Wii's hybrid DVD drive and overrides certain parts of the media's data stream. Allowing you to do all sorts of wonderful things (like boot back-up discs).

    The most important part of this project, is that it is open source! In addition to releasing the Wiip chip, you will soon be able to download the PCB schematics, Wiip firmware and documentation! We hope by creating this project, other users will make modifications to our code for newer updates in the future (if needed).

    The current features of Wiip are:

    • Actually upgradeable! Device is bundled with an easy to use programming cable.
    • 20 MHz AVR microcontroller with 2KB of EEPROM (SMD type)
    • Customizable (via open source code)
    • Boots Wii games (DVD+R / DVD-R media)
    • Boots GC games and homebrew
    • AudioFix (naturally)
    • On board DIP switch (enable/disable mod, enable/disable stealth)
    • Works on DMS / D2A chipsets (sorry, we haven't worked on D2B yet)
    • The schematics, code, and software will be available soon to make your own.






    WiiSKAS


    WiiSKAS Mod-Chip BETA 1
    WiiSKAS Mod-Chip BETA 1b (PIC 12F629 support)
    WiiSKAS Fusebit Settings (for no DRE's) ([Register or Login to view links])
    WiiSKAS Working Pic 1
    WiiSKAS Working Pic 2

    WiiSKAS Modchip Beta1 (20/02/07) by N3TKaT
    ** For internal use only - DO NOT DISTRIBUTE **

    The .HEX are for both Atmels ATmega8 & ATmega88
    (ATmega88 works better). It needs a 20MHz
    with its 22pF capacitors, although it also works
    with a 16MHz, but has higher possibilities
    of losing sync. If it loses sync you’ll have to
    unplug and plug the Wii.

    Only works with DMS and D2A chipsets.

    For installation information check WiiSKAS_Schematic.jpg

    Included is a disassembly of the WiiSKA code src (for those who want to port to PIC12C508 or SX28AC).
    It is now confirmed the hex is working- pics above.





    Chiip


    Chiip Install Points
    Chiip Install Points (Clarified)
    Chiip Install Manual And Firmware v1.0 BETA 1
    Chiip Firmware v1.0 BETA 2
    Chiip Firmware v1.0 BETA 4
    Chiip Firmware v1.0 BETA 5 (supports GameCube back-ups and homebrew)
    Chiip Firmware v1.0 BETA 6 (6x DVD speed - no more stuttering videos, Improved DVD+RW media compatibility, Improved fault tolerance, and Improved code)
    Chiip Firmware v1.0 BETA 7 (Fixed some issues for D2B users. There shouldn't be any noticeable differences for DMS/D2A users)
    Chiip Firmware v0.9.0 (This is a yet another test version).
    Chiip Firmware v0.9.1 (It's yet another test version).

    Chiip is yet another mod-chip for the Nintendo Wii. The difference between Chiip and the other Wii mod-chips currently available is the fact that you can build it yourself. It works because a single microcontroller is all the current Wii mod-chips need - the WiiNja is a perfect example, but the other current mod-chips are very similar in fact. Building Chiip is a two-step procedure:

    The first step is building a small device that allows uploading firmware to a microcontroller, by connecting it to a PC. Building this device took me 0.94 € and about 2/3 of all the work, but it's a device that you can reuse for a whole number of cool things. (Just search the Web for projects using a microcontroller, and you should soon get an idea of how many cool things you can do with it). You will also update the firmware with this device. I'm planning to release more cool-things-to-do-with-a-cheap-microcontroller projects myself every now and then, like interfacing other kinds of controllers to a Wii, and maybe similar mod-chips for other video game consoles too.

    The second step is building the mod-chip itself. The bare minimum to build a single working mod-chip may take just about 1.70 € and no soldering at all, but even with the optional stuff (like a socket for updating the chip and a status LED) it took me just 2.23 €.

    Features:

    • Works with Wii and GameCube Originals
    • Works with Wii and GameCube Back-ups from the same region
    • Probably works with GameCube homebrew too, but never tested
    • Probably works with different region software using swap trick
    • Works with DVR+R / DVD-R / DVD+RW (and probably DVD-RW too)
    • Works with DMS / D2A / D2B chipsets
    • Works with ATmega8L-8 and ATmega8-16 on 3.3V supply

    Known bugs:

    • Stutters on some videos
    • Probably no GameCube audiofix (no feedback on that yet)

    Not implemented yet:

    • Auto-region patching for Wii/GameCube
    • Update via DVD






    WiiFree


    WiiFree ASM Source
    WiiFree EasyConnect (This is a clean and cheap solution, which makes the installation of PIC 12F629/675 in the Wii console extremely easy; allowing the customers to upgrade the code of the WiiFree without any problem. Every PCB comes with a new PIC12F629 bundled).
    WiiFree EasyConnect 12xxx Install Diagram
    WiiFree Install Manual And Firmware v1.0-1.1 (supports PIC 12F629)
    WiiFree Install Manual And Firmware v1.2 (supports PICs 12F629 and 12F683)
    WiiFree Install Manual And Firmware v1.21 (corrects the issues with Japanese D2B consoles)
    WiiFree Install Manual And Firmware v1.22 (corrects previous DRE issues, includes SRC code)
    WiiFree Install Manual And Firmware v1.23 (updated the code, functionality is the same)
    WiiFree Install Manual And Firmware v1.50 (GC back-ups support! Updated the patching code, removed the wait_disc routine AND... Disco!)
    WiiFree Install Manual And Firmware v1.51 (Updated the code, added comments. Better detection of back-up disc insert. Cleaner drive detection and alternate LED blink when error.)
    WiiFree Install Manual And Firmware v2.0 BETA 1-2 (Supports region patching for playing imports and... CONFIGURATION FROM DISC!)
    WiiFree Install Manual And Firmware v2.0 BETA 1-2a (Alternate)
    WiiFree Install Manual And Firmware v2.0 BETA 3-5 (Fixed big BUG!! Fixed original Wii games not playing. Fixed some GC games not playing).
    WiiFree Install Manual And Firmware v2.20 (Full drive speed support. All media support: DVD+R, DVD+RW, DVD-R, DVD-RW).
    WiiFree Install Manual And Firmware v2.21 (Fixed bug where originals were not detected in some cases).
    WiiFree Install Manual And Firmware v2.22 (Improved detection mechanism).
    WiiFree Install Manual And Firmware v2.23 (Again we think we've done it.. Lack of sleep and not owning all the Wii's in the world sometimes makes it difficult to design a mod-chip).
    WiiFree Install Manual And Firmware v2.24 (Fixed minor bug with infinite loop).
    WiiFree Install Manual And Firmware v2.25 (Cleaned the code. Removed a loop which could influence the region patching. Improved region patching).
    WiiFree Install Manual And Firmware v2.26 (Optimized code, some stuff might work better. Configurable region and speedsettings with the NEW config dvd. You might experience flickering of the config menu, sorry but we didn't feel like fixing that at the moment. You can set the region and speed in the hex file by changing the DATA EEPROM byte 0 and 1. Byte 0 is the region: 0 for JAP, 1 for USA, 2 for EUR. Byte 1 is the speedsetting: 0 for low, 1 for medium, 2 for max. Or just use the config DVD the old config DVD wont work anymore).
    WiiFree Install Manual And Firmware v2.28 (Just experimented with the code. We think we improved the region patching).
    WiiFree Install Manual And Firmware v2.29 (Test Version: Something that works here, might not work on other Wiis).
    WiiFree Install Manual And Firmware v2.30 (Test Version: Some code optimizations).
    WiiFree Install Manual And Firmware v2.31 (Changed the patching of back-ups. Faster/better detection/starting of back-ups. No more strange noises coming from the drive).
    WiiFree Install Manual And Firmware v2.32 (Again changed the patching routine. Better timing for region patch... Almost full 12F629).
    WiiFree Install Manual And Firmware v2.33a (This time we reduced the code with 20% and changed the moment of the speedfix. Fixed bug in new configuration code).
    WiiFree Install Manual And Firmware v2.34a (Just messed around with the speedfix again. Fixed bug in new configuration code).
    WiiFree Install Manual And Firmware v2.35-2.37 (2.36 - 2.37: Original Wii import support. Try the 2.36 version to test the GC import experimental support. 2.35 - 2.36: Using speedfix method used in 2.34a instead of the one in 2.33a, it works better on our consoles. 2.34a - 2.35: Created a version with experimental GameCube regionfree (thnx to Bell). And changed the region patching to only 2 bytes per region).
    WiiFree Install Manual And Firmware v2.38-2.39a (Includes 2.38, 2.38a, 2.38b, and 2.39a builds).
    WiiFree Install Manual And Firmware v2.40-2.42a (Includes 2.40, 2.41, and 2.42a builds).
    WiiFree Install Manual And Firmware v2.43-2.43c (Includes v2.43 and 2.43c builds).
    WiiFree Install Manual And Firmware v2.44a (Fixed a tiny bug in the media compatibility. Made the disc patching more generic, which seems to solve some problems people experience. Fixed the lack of sleep).
    WiiFree Install Manual And Firmware v2.45 (2.44a - 2.45: Added a manual.txt on how to use WiiFree. Only patching the maxdiscsize if it wasn't recognized by the drive now (which could result in better dectection of media in some cases). Official support for 16F628(A), now the LEDs are working on the proper pins. Added compiler_constants library, so you should be able to compile WiiFree yourself now).
    WiiFree Install Manual And Firmware v2.50 (Added LCD support for 16F628. Only shows that WiiFree is loaded so far. Example source included).
    WiiFree Install Manual And Firmware v2.51 (Added bunch of features for the LCD screen; Also updated schematics, now using USB 5v point, and LCD support for 16F628A).
    WiiFree Install Manual And Firmware v2.51b (Updated installation schematic. All binaries/sources remain the same. 16F628A confirmed to work).

    Programming Configuration:

    Oscillator: INTOSC
    Watchdog Timer: Enabled
    Power-up Timer: Disable
    MCLR Pin Func: Reset
    Brown-out Detect: Enable

    This is what it does:

    • Run GameCube originals
    • Run Wii originals
    • Run Wii back-ups
    • Support for D2A and D2B!!
    • Support for 12F629 and 12F683 chips (the installation for the 12F683 is the same as the 12F629)

    BECAUSE CODE MUST BE FREE!





    W2 FinalChip


    W2 FinalChip Install Points

    The W2 FInalChip is only as good as its code. Here is a overview what a W2 FinalChip programmed with the WiiFree Code can do...

    Features:

    • Run GameCube originals
    • Run GameCube back-ups
    • Run Wii originals
    • Run Wii back-ups
    • Run Wii games from different regions
    • Support for DMS, D2A and D2B!
    • Speedfix
    • Support for all media: DVD+R, DVD+RW, DVD-R, DVD-RW
    • Configuration DVD for setting up your region






    OpenWii


    OpenWii Install Manual And Firmware v1.0
    OpenWii Install Manual And Firmware v1.1 (GC Support Added for Back-ups/Homebrew)
    OpenWii PIC 12F629/675 BETA Firmware v1.1 (hex code for the 12F629/675 PIC chip)
    OpenWii MSP430 Platform Schematics And ELF Binary
    OpenWii Install Manual And Firmware v1.2 (Now supports speed fix- Wario works!)
    OpenWii Install Manual And Firmware v1.3 BETA (DVD+R/DVD+RW/DVD-RW + Proper Speed fix)
    OpenWii Install Manual And Firmware v1.3 FINAL (Includes: DMS / D2A / D2B Full Support (Rayman/COD3 100%), Dvd-r/Dvd+r/Dvd+rw/dvd-rw FULL support (NO BITSET), Own Region Wii game support, GameCube Back-ups (Homebrew) region free, Full Speed Fix (wario/cod/rayman/others) No studder, and Source Code)
    OpenWii Install Manual And Firmware v2.0 (Region Free, New Code Base/New method for all, Audio Fix next. Please note you must use the setup disk first to set the region or nothing will work).
    OpenWii Install Manual And Firmware v2.01 (Fixes Atmega8 and GC Region issue).
    OpenWii Install Manual And Firmware v2.1 (This is a major rewrite over previous versions! Some of the changes are: majority of the code is compiled for the mn10200 microcontroller located on the drive itself, uploaded apon reset by the mod-chip, and then activated during the discLogin phase. This was done to allow for more control over the drive's operation and because the 32-bit processor inside the drive allows for more code in less space than the 8-bit mod-chip. region freeness, woot! improved makefiles to allow quicker compiling for different targets, and eliminate redundancys).
    OpenWii Install Manual And Firmware v2.1B (Code cleanup. Fixes for Chiip timing errors. Fixed 8cm GC games).
    OpenWii Install Manual And Firmware v2.2 (This release is ONLY for Atmega8/Chiip users; includes DVD-Upgrade!)
    OpenWii Install Manual And Firmware v2.2B (This release adds the following NEW items: Setup drive speed via setup disk 2.0, Original GameCube Import support, and Original Wii Import support. Includes: Sd-Load .dol, DVD, Set-Up Disc, and SRC Code!)
    OpenWii v2.2B SMG Fix Hexcodes
    OpenWii Install Manual And Firmware v2.3A (New features: SMG fix (original is working too), Automatic drive type detection (DMS/D2A/D2B), Bootloader bugfix (ALL previous OpenWii versions are jumping to a wrong address), and LED blink codes (L = long blink, S = short blink))
    OpenWii Install Manual And Firmware v2.4 (New Features: Audiofix, DualLayer Support, New LED blink codes (L = long blink, S = short blink) Power Up: L S, Drive Patched: L S S (e.g. each disc change) Set Region / Speed / Audifix: L S S S (using setup disc), Upgrade Firmware: LED flashes (update is finished when led is off), New setup disc behavior)

    OpenWii is an open source Wii mod-chip firmware written in pure C.

    Includes:

    avr - Wiip (ATs902313) AVR good place to base other avr designs.
    chiip - Chiip (ATmega8L8) another atmel design using different chips.
    msp430 - files specific to the mps430 microcontroller

    Features:

    • DMS / D2A / D2B Full Support
    • DVD-R 100% Full Support (DVD + R Coming soon)
    • GC Back-ups (v1.1+)
    • Own Region Wii game support






    DuoWii


    DuoWii Install Points
    DuoWii Install Points (Special D2B)

    Features:

    • Supports all console/drive versions USA, PAL, and JAP (DMS, D2A, D2B)
    • Direct boot of in region Wii back-ups
    • Direct boot of original Wii imports
    • Direct boot of import Wii back-ups
    • Direct boot of in region GC back-ups
    • Direct boot of original GC imports
    • Direct boot of import GC back-ups
    • Direct boot of homebrew in GC mode
    • Supports DVD-R, DVD+R
    • Improved recognition for back-ups
    • Quicksolder interface
    • Thin design for easier installation
    • Chip disable function
    • LED indicator light






    WiiD (Max Louarn)


    WiiD Install Points
    WiiD Firmware Update v0.1 (USA) (Adds Region-Free capability)
    WiiD Firmware Update v0.1 (PAL) (Adds Region-Free capability)
    WiiD Firmware Update v0.1 (JAP) (Adds Region-Free capability)
    WiiD Firmware Update v0.2 (USA) (Region Free capability from v0.1, and corrects issues with GC SELFBOOT MULTIVER v2/v3 and audio streaming games).
    WiiD Firmware Update v0.2 (JAP) (Region Free capability from v0.1, and corrects issues with GC SELFBOOT MULTIVER v2/v3 and audio streaming games).
    WiiD Firmware Update v0.2 (PAL) (Region Free capability from v0.1, and corrects issues with GC SELFBOOT MULTIVER v2/v3 and audio streaming games).
    WiiD Firmware Update v0.3 (USA/PAL/JAP) (This Firmware Update includes: 1) Add Region Free capability to your Wii, 2) Fix Super Mario Galaxy error #001, 3) Improve media reading support)

    The WiiD has all the features you'd expect from a Wii Mod including upgrade functions, full hardware support, audio fix and more. This new Wii Mod is rumored to be made by the 'fake' Matrix Team (from [Register or Login to view links] Web site) unfortunately, instead of the real Matrix Team (located at [Register or Login to view links] Web site). The full list of provisional features are listed below:

    Features:

    • Non Swap/Direct Boot for Wii back-ups
    • Non Swap/Direct Boot for GC back-ups
    • Non Swap/Direct Boot for Homebrew in GC mode
    • Non Swap/Direct Boot for NTSC region Wii games/back-ups on US and JAP consoles
    • Boots PAL Back-ups/Originals on NTSC WII consoles (partially without swapping)
    • Boots NTSC Back-ups/Originals on PAL WII consoles (partially without swapping)
    • Boots different region GC Games Original/Back-up Imports (partially without swapping)
    • EUROPE/USA/JAPAN Wii Console Support
    • Double soldering option, 6 wires or Quicksolder (No wires required!)
    • Compatible with all the Wii Console Versions/Drive currently available
    • Full D2B Drive Support
    • Built-in audio fix
    • Full support for DVD-R/DVD+R and DVD+RW/DVD-RW without Booktype
    • Supports Multi-Disc/Multi-games for BOTH Wii and GameCube
    • Recovery Mode for incomplete/Bad Upgrades
    • Stealth mode
    • Firmware fully Upgradable via DVD!






    WiiReZ


    WiiReZ Install Points

    WiiReZ is a Wii last-generation mod-chip, that offers all the last features, see the specs:

    Features:

    • Direct Boot for Wii back-ups and GC back-ups
    • Direct Boot for Homebrew in GC mode
    • Direct Boot for NTSC region Wii games/backups on US and JAP consoles
    • Support of PAL back-ups/original on the NTSC Wii (some with swaps)
    • Support of NTSC back-ups/original on the PAL Wii (some with swaps)
    • Support of IMPORT GAMES GC on differents region Wii (some with swaps)
    • ALL CONSOLE NTSC AND PAL SUPPORTED
    • SOLDERLESS POINTS
    • PADS FOR NORMAL CONNECTIONS (for future consoles, or for who don't like solderless)
    • Full D2B Drive Support
    • Built-in Audio fix
    • Full support for DVD-R/DVD+R and DVD+RW/DVD-RW without Booktype
    • Supports Multi-Disc games for both Wii and GameCube
    • Recovery Mode for Incomplete/Bad Upgrades
    • Stealth mode






    YAOSM: Yet Another Open-Source Mod-Chip

    YAOSM Install Manual And Firmware v1.0
    YAOSM Install Manual And Firmware v1.1 (Now original Wii imports should work, and also automatic region detection works fine with originals (I've tested with Wii Sports and Zelda TP)).
    YAOSM Install Manual And Firmware v1.2 (The only difference between 1.1 and 1.2 is that GameCube original imports now should work).
    YAOSM Install Manual And Firmware v1.3 (Alternative speedsetting and support for more orginal GC imports! New in this release is added the "medium" speed fix for those who want it and original GC imports now also correctly detects demo and promotional discs. For example Zelda Collectors disc).
    YAOSM Install Manual And Firmware v1.7 (Re-added support for 12F635/16F636/16F639 as it has been fixed (bug in GC basic), Minor code optimizations (saving a couple of bytes), Removed support for 12F635/16F636/16F639 since it has never been working, Redesigned the speed patching and made it fully configurable, Enabled the quick 4 flashes on LED1 when EPROM is updated, Added support for yaosm configuration disc, Removed support for rescue discs (no longer needed), Further optimizations to the code and fixed an issue with version 1.4, Version 1.5 hopefully is what version 1.4 should have been, Increased the number of loops before giving up while detecting type of game, which resulted in better detection of imports, Optimized the code for speed and size. New code is 22.5% smaller than version 1.3, Added silent mode (Speedfix default off but can be turned on when needed), and Enabled support for rescue disc (reset/disable region patching)).
    YAOSM SMG Test v1-2 Hexcodes (Fix for Super Mario Galaxy)
    SMG Test v3-7 Hexcodes (Fix for Super Mario Galaxy)
    YAOSM Install Manual And Firmware v1.9 (Added GameID patch for Action Replay discs, all credit for this goes to Nekokabu. Consider this feature as experimental as it will only work on some AR versions, and Added fix for Super Mario Galaxy back-ups).
    YAOSM AudioFix 2
    YAOSM Install Manual And Firmware v2.0 RC2 (Audiofix working on all chips!)
    YAOSM Install Manual And Config Discs And Firmware v2.0 RC3 (More Optimizations and Configuration Discs included)
    YAOSM Install Manual And Config Discs And Firmware v2.0 RC4 (Changed from previous version is that it now has GameCube audiofix and the most flexible audiofix currently available. byte 5 = Audiofix on/off, 0x00 = Disable the Gamecube audiofix (always off), 0x01 = Disable audiofix by default (when powering up the Wii) and enable it by inserting a Wii disc before running your GC backup, 0x02 = Enable audiofix by default (when powering up the Wii) and disable it by inserting a Wii disc before running your GC backup, 0xFF = Enable the Gamecube audiofix (always on)(default))
    YAOSM Install Manual And Config Discs And Firmware v3.0 RC1-3
    YAOSM Install Manual And Config Discs And Firmware v3.0 RC1a (Better Dual Layer support. Supports SSBB on DVD+DL and DVD-DL with or without DVD-ROM booktype as long as your Wii can read the media. DVD upgradability. Proof of concept upgrade available on config disc. Config disc can now be used without a GC controller. Press resetbutton once to enter yaosm configuration program. Then hold to move the "cursor" and press quickly to change a setting. Recovery feature if an upgrade fails.)
    YAOSM Install Manual And Config Discs And Firmware v3.0 Final
    YAOSM Install Manual And Config Discs And Firmware v3.0 RC2
    YAOSM Install Manual And Firmware v3.2 (Improved disc detection, Fixed PIC code so that it cannot corrupt the region byte).

    YAOSM is Yet Another Open-Source Mod-Chip! To build from the source you need to download GCBasic, and make sure you also dowload the latest update.

    Note: A big WARNING about the automatic region detection. It only seems to work you use a back-up disc. I tried using Wii Sports and ended up reprogramming the chip. On the other hand it seems to work perfect with both GC and Wii back-ups. This is ONLY an issue with the first disc you insert after programming the chip. After that the region setting is saved and never changed again.

    This most likely means that original imports will fail as well.

    Features:

    • Boot Wii originals
    • Boot Wii back-ups
    • Boot Wii imports (Partial support)
    • Boot GameCube originals
    • Boot GameCube back-ups
    • Boot GameCube imports (Experimental, only tested with Zelda Wind Waker NTSC which is detected but hangs at black screen when started.)
    • Run all media (DVD-R, DVD-RW, DVD+R, DVD+RW)
    • Speedfix
    • Automatic region detection

    Missing Features:

    • GameCube audiofix? At least I think it doesn't but I have no GC controllers so I cant try it.
    • Multi-disc GameCube games? I have neither such games nor any controllers so I cannot try it.

    Hexfiles are included for the following PICs:

    12F629/12F675
    12F635
    12F683
    16F627/16F627A/16F628/16F628A/16F648A
    16F630/16F676
    16F639
    16F684






    Wiiva


    Features:

    • Supports all Wii regions (PAL, NTSC-U, and NTSC-J)
    • High quality PCB and components
    • Comes in high Quality ESD bag
    • Ready with pretinned wires
    • Double-sided tape for easy fitting
    • LED Indicator for checking install and for error readouts
    • Compatible with DMS, D2A, and D2B dvd drive chipsets
    • Compatible with rev1 and rev2 dvd drive boards
    • Compatible with DVD-R, DVD+R, DVD-RW, and DVD+RW (No need to change bitsettings)
    • Upgradeable via DVD
    • Bad flash recovery mode (even recoverable after pernicious code)
    • Stealth mode
    • Direct boot Wii games
    • Direct boot GC games
    • Boot Wii Imports (Partial)
    • Boot GC Imports
    • Multi-disc support
    • Built-in audio fix






    CycloWiz (Max Louarn)


    CycloWiz Defective Units
    CycloWiz Installed
    CycloWiz Fix Tutorial
    CycloWiz Upgrade Tutorial
    CycloWiz Install Manual v1.1
    CycloWiz 3.0 Upgrade (NTSC/USA) [For DMS/D2A]
    CycloWiz 3.0 Upgrade (NTSC/JAP) [For DMS/D2A]
    CycloWiz 3.0 Upgrade (PAL) [For DMS/D2A]
    CycloWiz 3.0B Upgrade (NTSC/USA) (adds D2B support)
    CycloWiz 3.0B Upgrade (NTSC/JAP) (adds D2B support)
    CycloWiz 3.0B Upgrade (PAL) (adds D2B support)
    CycloWiz Flasher v1.0 BETA
    WiiFree v2.45 For CycloWiz RC1
    CycloWiz 3.5 Upgrade (NTSC/USA) (adds Dual-Layer Media support)
    CycloWiz 3.5 Upgrade (NTSC/JAP) (adds Dual-Layer Media support)
    CycloWiz 3.5 Upgrade (PAL) (adds Dual-Layer Media support)
    CycloWiz v3.6 BETA Upgrade (NTSC/USA) (adds Mario Galaxy fix support)
    CycloWiz v3.6 BETA Upgrade (PAL) (adds Mario Galaxy fix support)
    CycloWiz v3.6 BETA Upgrade (NTSC/JAP) (adds Mario Galaxy fix support)
    CycloWiz v3.0b Firmware Source Code

    Features:

    • Fully Upgradeable via DVD
    • Direct boot of Wii back-ups
    • Direct boot of GC back-ups
    • Direct boot of homebrew in GC mode
    • Runs imported GC games (needs swap)
    • Built-in audio fix (no patch required)
    • Compatible with Multi-Disc games
    • Compatible with DVD-R and DVD+R
    • Stealth mods
    • Multi-purpose LED
    • Chips supplied in professional ESD packing
    • Very easy to install
    • Direct boot of NTSC/PAL Wii Imports on NTSC consoles (no patch needed) [Upgrade Feature ONLY]
    • Direct boot of NTSC Wii Imports on PAL consoles (no patch needed, partial compatibility) [Upgrade Feature ONLY]
    • Runs Imported GC games (partially without swap) [Upgrade Feature ONLY]
    • Perfect compatibility (100% of games are claimed as working) [Upgrade Feature ONLY]
    • Improved read (no more slowdowns) [Upgrade Feature ONLY]
    • Compatible with DVD-R, DVD+R, DVD-RW and DVD+RW (no bitsetting required) [Upgrade Feature ONLY]






    Awiier / Awiier 2


    Awiier Install Points
    Awiier Installed
    Awiier 2 IC Pin-Out

    This chip originates from Taiwan, and specifications include:

    Features:

    • Direct boot of Wii/GC back-ups
    • Direct boot of homebrew in GC mode
    • Supports All Currently available console/drive versions
    • Supports D2B chipsets
    • Direct boot of different NTSC region
    • Wii games/back-ups on US and JAP
    • Partial support for NTSC region Wii games/back-ups on PAL consoles
    • Boots different region GC games
    • Supports DVD-R/DVD+R and +RW
    • Improved readsettings for media
    • Built-in audio fix supports fullsize 4GB discs

    Update: Awiier 2 upgraded version of Awiier chip is now available. It is compatible with D2B chipset consoles and includes region-free functionality, but still has issues on DVD+R(W) media discs.






    WiiJii (Chip Kit)


    WiiJii IC-Prog Lite v1.1c Programmer

    What Is the WiiJii Chip Kit?

    The WiiJii Chip Kit is a cost effective PIC 12f629 test kit. Each kit includes 1 simple JDM programmer, 1 PIC 12f629 chip mounted on a custom made board with a set of pins for easy conectivity, 1 quick install external header mount, and 5 9" long lengths of awg 30 Kynar wire.

    IC-Prog lite is a stripped down PIC writing program.

    It is compatable with JDM programmers and the PIC 12f629 exclusivly and the only set-up required is to pick your com port and hex.





    WiiM (Pacific Source Trading Company/HK)


    WiiM Installed

    Features:

    • Supports all current Wii
    • Supports all regions PAL/USA/JAP original & back-up disc
    • Direct boot of Wii back-ups
    • Direct boot of GC back-ups
    • Direct boot of homebrew in GC mode
    • Direct boot of all GC import back-ups by SWAP
    • 100% compatibility of all games
    • Supports all regions GC games
    • Supports Multi-Disc & Multi-Games disc
    • Supports D2B chips
    • Supports DVD R/DVD-R and RW media
    • BiOS Upgradeable by DVD
    • Upgrade read frequency
    • Easy to install
    • Manual Stealth mode





    Wii-Boss

    Wii-Boss Installation Tutorial
    Wii-Boss Programming Guide (PDF)

    Features:

    The Wii-Boss is designed as a ‘quick solder’ chip with an external ribbon cable that can be left inside the machine, taped down on the back of the Wii, or even hidden inside the memory card bay. This chip can be fully programmed inside the machine with any code that supports the 12f629 PIC Microchip.

    The Wii-Boss is also designed to allow external booting off the ribbon cable, therefore protecting the user against ever having to pull the Wii apart ever again if their requirements for a particular style of mod-chip change. External adapters to make mod-chips and PC applications like DVD-Tool boot externally have already been designed and will be produced soon upon the initial product release.

    The Wii-Boss even comes with its own RS-232 port external programmer. Software for the programmer is open source and therefore is provided free. The programmer is based on an open source project and therefore could be ‘modded’, theoretically, to be used as a standard RS-232 PIC programmer.






    Argon (Wiiktus/Infectus)


    Argon (Wiitkus) Infectus Solder Points
    Argon Installed
    Wiiktus Firmware v1.2 BETA For Argon Infectus Wii D2C
    Wiiktus Firmware v1.2 For Argon Infectus Wii D2C (Non-BETA, Freeze problems fixed, Direct boot without drive reset).
    Wiiktus Installation Guide
    Wiiktus Firmware v1.4-1.7 For Argon Infectus Wii D2C (GC and Misc Fixes)
    Wasabus Firmware For Argon SPI 9-Wires BETA
    AmoxiFlash v0.2 (WinXP) For Infectus
    Argon SPI D2E A2p250 Firmware





    Argon 2 (Infectus)


    Argon 2 Install Manual (EN) 1.0
    Argon 2 JTAG 1.8 Firmware And Injectus Programmer
    ARGON2 is the result of many months of development. We call it a 4th generation modchip because it introduces many important new features for the scene:

    1- ARGON2 is not only a MODCHIP, is a complete SOFTWARE SUITE that introduces a new concept for distribution of FREE software on the NINTENDO WII. The CORE of the project is, in fact, not the HARDWARE but the SOFTWARE. We have developed a new CHANNEL for the NINTENDO WII called “ARGONCHANNEL." Through this channel we will distribute FREE HOMEBREW SOFTWARE and, in the future, more and more things.

    2- ARGON2 with ARGONCHANNEL is the first Modchip for WII that is “internet” updatable. ARGONCHANNEL has a functionality to UPDATE ARGON2 directly from the menu.

    3- The website will have plenty of infos and tools that will allow homebrew developers to build their application and distribute it for free to all ARGON2 users. An updated feed of new software will be available ONLINE on the website and INSIDE the ARGONCHANNEL WII.

    4- As for the new HARDWARE, ARGON2 has two important aspects:

    a. Is complete SOLDERLESS, with an ORIGINAL wii-clip on board.

    b. A 32 pin connector on WII LENS DATA BUS that will allow the modchip to access the DATA CHANNEL of the Wii. Right now this is used ONLY to protect the proprietary software for ARGON2 (in fact, if you try to insert the ARGONCHANNEL INSTALLATION ISO to a wii without ARGON2 it simply does not work). In the future we plan to add some “special” things, like an ISO emulator that will allow you to put apps on the 16Mbit on board flash. Lastly, and even more interesting, is the ability to dor REAL TIME PATCHING when is necessary. A firmware for D3 (D2NOTHING) is under development.

    5- An important consideration of the ARGON2 kit is LEGAL USE. Many judges around world are attempting to stopp MODCHIP sales because the PRINCIPAL use of modchips is PIRACY. With ARGON2, we have chosen a different approach. Included in the first release there are over 10 applications for ARGONCHANNEL that are FREE. This means that for about 40 EUR a user can buy a KIT that allows access to MANY FREE HOMBREW APPLICATIONS. This is LESS than the cost of 1 WII GAME. We think this will be a good “argument” to avoid possible legal problems.




    [SIZE=5]Wasabi Zero

    Wasabi Zero v1.1 Installation Diagram
    Wasabi Zero v1.1 Solderless Installation Diagram

    Features: Wasabi Zero is fully compatible with original Wasabi. However, the new Wasabi Zero has been vastly improved in the following ways:

    Easy installation - It has never been easier to install a Wii modchip. Connect the solderless adapter to the chip using the connector, plug it on the drive chip, and start playing. Alternatively, solder version is also available for those who wish to do a regular installation (5 or 6 wires depending on drive version, no pin soldering required).

    Quality - Wasabi V2 and V3 have been known to most installers as the most solid chips on the market. Wasabi Zero will be no exception and features a thicker PCB, ultra-clean routing and a solid wide pitch connector for the solderless adapter.

    Flexibility - As Wasabi Zero is fully compatible with the original Wasabi, they share the same firmware and you'll get all the usual benefits including proven Drivecode, DVD Updates and Configuration Disc. But that's not all. Wasabi Zero can be fully reprogrammed using JTAG.

    Price - The only complaint we've got from users regarding original Wasabi has been its price. We reworked our price structure, you'll be able to get the ultimate chip for a very reasonable price.

    By releasing the original Wasabi without JTAG, we made it clear that users should not require external programmers, and that they can fully update their chip using DVD, and we still stand by this philosophy. Still, JTAG upgradability is something that installers kept asking for, to manage their stock without fear of a new drive revision. It is for them that we included this feature.





    Wasabi DX

    Wasabi DX Installation Diagram v1.0
    Wasabi DX Upgrade Disc v1.1 (Adds support for multi-game discs and fixes an annoying bug that slipped into production version due to a last minute change in the code).
    )Wasabi DX Upgrade Disc v1.2 (Reports that some original games, such as SMG or SSBB, didn't work correctly with previous firmwares, giving an error message instead of running. The bug has been identified and fixed in firmware 1.2.)
    Wasabi DX Upgrade Disc v2.0 BETA
    Wasabi DX Upgrade Disc v3.0
    The makers of Wasabi have also introduced a solderless modchip solution for the Wii.

    We are proud to announce Wasabi DX, the ultimate solution for D2nothing/D3 drives!

    • Plug and play installation on DMS, D2A, D2B, D2C, D2C2, D2E, epoxy D2E and D2nothing/D3 drives
    • Fully upgradable from DVD
    • Configuration Disc
    • 16Mbit embedded Flash memory for firmware usage
    • Recovery mode
    • JTAG connector

    Full feature list will be available soon. Wasabi DX is the first and only fully universal, plug and play and upgradable solution available for your Wii ! Like any other D2nothing/D3 solution, and unlike Wasabi Zero, read drive speed is currently limited to 3X.




    Wasabi


    Wasabi Installation Manual v1.0
    Wasabi Installation Manual v1.1
    Wasabus Firmware v0.9 BETA For Infectus 2 Wii D2C
    Wasabus Firmware v1.2 Final For Infectus 2 Wii D2C
    Argon D2C2/D2C Firmware Wasabus BETA2
    Wasubi Upgrade Disc v1.1 (KOR)
    Wasabi Upgrade Disc v1.2 BETA (Added D2E support [Wasabi rev.2 only], Fixed slow reset-to-spinning time problem that existed on some rare installs, Various drivecode improvements for all drive versions [DMS, D2B, D2C, D2C2]).
    Wasubi Upgrade Disc v1.3
    Wasubi Upgrade Disc v1.4
    Wasabi Upgrade/Config Disc v1.4B
    Wasabi Upgrade/Config Disc v3.0
    Wasabi NSMB Patcher BCAFix: Wasabi BCA Windows patcher for NSMB backup. BCA patcher for NSMB backup (make sure you upgrade to 3.0)

    Features:

    • Direct boot of Wii and Gamecube original, import, and backup discs
    • Supports all chipset versions: DMS, D2A, D2B and D2C (including D1A)
    • Supports all regions, configurable via jumpers
    • Fully upgradable from DVD (no external programmer required)
    • Only 5 wires on DMS, D2A, D2B
    • Only 9 wires on D2C (only 3 of them soldered to pin/via)
    • Very easy installation on "cut-pin" drives
    • On-board flash (128KB)
    • Integrated Audiostreaming fix for GC games
    • Excellent media compatibility (supports DL media)
    • Works with SMG and SSBB
    • Flash recovery mode
    • Two LED for easy installation troubleshooting
    • Full firmware control even on D2C chipset
    • Drivecode symmetry between all chipset versions
    • Compatible with all GC and Wii homebrew programs
    • No extra wires required for region override
    • No external switch required






    Wiizard (David France/Proto Pic)

    Wiizard D2C2 Install Diagram

    New Wiizard D2C2 Features:

    • Non Swap / Direct Boot
    • Boots Own Region WII Backups Directly
    • Boots Own Region Gamecube Backups Directly
    • Boots All NTSC JAP/USA on NTSC WII
    • Boots NTSC Backups/Originals on PAL WII Partially
    • Boots PAL Backups/Originals on NTSC WII Partially
    • Boots Directly Gamecube Original/Backups Imports Partially
    • Boots All Gamecube Import Backups by SWAP
    • Great Stability, Stability CAP Built-In
    • 3 Wires + GND + VCC for D2A/DMS/D2B/D2B Cutted
    • 7 Wires + GND + VCC for D2C/D2C2 Boards
    • D2A/DMS/D2B/D2C/D2C2 Chipset Models Supported
    • Supports all the WII Versions/Drive currently available
    • Improved Read Method (No DRE), Audiofix
    • Multi-disc, Multi-games, Flash Recovery Mode
    • Support DVD-R/DVD+R & DVD+RW/DVD-RW/DVD9/DVD+R DL without Booktype
    • Universal EUROPE/USA/JAPAN Wii Console Supported
    • Stealth & Anti Error 001 Mode & SSBB DL Support
    • DVD FIRMWARE UPGRADES, No External Programmer Needed
    • Upgradeable ACTEL IC by JTAG Programmer

    Original Features:

    • 4 wires & quick solder interface
    • 2 x LEDs to show correct install
    • Fully upgradable via DVD/disc
    • Direct boot of Wii back-ups
    • Direct boot of GC back-ups
    • Boots multi-region GC games/back-ups
    • Boots multi-region Wii games/back-ups
    • Supports DVD-R and DVD+R
    • Stealth mode
    • Top quality components






    Wasp (D2Pro/Argon Clone - David France)


    Features:

    • Compatible with DMS, D2A, D2B, D2C, D2C2 and D2E* chipsets
    • Compatible with all regions, USA, JAP , Korea and PAL
    • Compatible with D2B "cut pin" drives (does not require the cut pins to be connected)
    • Fully configurable and updatable via DVD
    • Advanced automatic region detection with fallback (works even if a drive is changed to a different region Wii)
    • Region override for Wii and Gamecube games
    • Direct Boot of Wii original, import, and backup games
    • Direct Boot of Gamecube original, import, and backup games
    • Direct boot of homebrew in GC mode
    • Supports multi-disc games, DVD-R, +R, +RW (no bitsetting required)
    • Supports DVD 9 Dual Layer
    • Supports factory made 'silvers', even with incorrect header data
    • Supports, SMG, SSBB, Mario Kart and other 'problem' titles
    • Streaming audio-fix for Gamecube games
    • Discspeed configurable via DVD, with separate settings for different media types
    • Recovery mode makes it impossible to brick the chip with a bad flash
    • 8Mbit onboard flash for storing data and applications
    • Rock solid performance with 1.5V FPGA core and high quality components
    • Onboard status LEDs
    • 9 Wires






    Wiip 2 (Paul Owen)

    Features:

    • Legal Distribution - Mod Is Blank From Point Of Sale
    • Boots All DVD-R, DVD+R, DVD-RW, DVD+RW
    • Boots All Wii Back-ups
    • Boots All Gamecube Back-ups & Homebrew
    • Supports All DMS, D2A, and D2B chipsets (D2C is almost done)
    • Supports NTSC/PAL/JAP
    • Easy Install - Only 5 Simple Solder Points
    • 100% Upgradable - Massive 8k Flash
    • First Mod To Upgrade Via DVD, LPT & USB
    • Ultra Fast 20Mhz ATMEGA8 CPU
    • Huge 8KB of Flash Update Space
    • External Clock to Control Read/Write Timing Protocol
    • Diagnostic LEDs
    • Extra Features Via Dip Switches
    • No More "Disc Loading Error"
    • Rock Solid In All Temperatures (Wii Gets Too Hot = No Problems)
    • Massive OpenSource Support
    • Can Be Used as a Universal Microcontroller Device - Many Future Uses
    • Mod Is Not Locked In Anyway Way - You Are In Control
    • This List Is Not Exhaustive - Many More Options & Functions Soon...






    NeoFlex (Paul Owen)


    NeoFlex Installation Guide

    Features:

    • No wire soldered needed.
    • Easy installnation FPC design for D2CKey/D2Pro/Argon chip.
    • No solder pad on bottom side of FPC to avoid brige-short issue.
    • Power-Gnd circuit designed inside FPC, No need to solder power wires.
    • With 4 Aided Align pads for people easy to align FPC cable on DVD Driver IC.
    • Region setting circuit designed inside FPC as well, people just need to solder the pad and jumper, no more wires soldered needed.






    W4Pro (Wasabi Clone)



    Features:

    • Fully DVD upgradable
    • Compatible with both D2C and D2C2 chipsets
    • Ultra stable oscillator for perfect stability
    • Chipset auto-detection
    • Compatible with all regions, USA, JAP, PAL (Europe and Australia) and Korea
    • Region override for Wii and Gamecube games
    • Direct Boot of Wii and Gamecube original, import, and backup games
    • Direct boot of homebrew in GC mode and Wii mode (on compatible IOS versions)
    • Supports multi-disc games, Dual-Layer, DVD-R, +R, +RW (no bitsetting required)
    • Supports factory made 'silvers', even with incorrect header data
    • Supports, SMG, SSBB, Mario Kart and other 'problem' titles
    • Streaming audio-fix for Gamecube games
    • Very big (1024Kbit) onboard flash for storing data and applications
    • Rock solid performance with 1.5V FPGA core and high quality components
    • Power-on self-test (P.O.S.T.) with onboard status LED






    D2Sun


    D2Sun v1.0-2.0
    D2Sun v3.0
    D2Sun Install Diagram v1
    D2Sun Install Diagram v1.2
    D2Sun Install Diagram v1.3
    D2Sun Install Diagram v1.31
    D2Sun Install Diagram v2.0
    D2Sun Install Diagram v2.02
    D2Sun Install Diagram v3.0
    D2Sun Install Diagram v3.0 Big 7
    D2SUN v3.08 A3P125 (6 Wires Support BCA)

    Features:

    • Fast and easy installation on all models. Plug and Play in 2 minutes!
    • Supports all chipsets DMS,D2A,D2B (including pincut), D2C, D2C2 and D2E 100% ALL-IN-1 solution.
    • Supports the pins-cuted D2B Wii without grinding the chip, just place the clip on chip like other versions.
    • Compatible with DVD+/-R, DVD+/-RW and Dual-layer 8.5G DVD (movies and GC OS)
    • Comes with 2~8Mbit on board SPI flash
    • Comes with 24M on board CLK, 100% work stable on all Wiis, without any CLK problem some other Mod- chips have
    • Direct boot of Wii original and backup games from the same region
    • Direct boot of Gamecube original and backup games from the same region
    • Direct boot of different NTSC region Wii and GC games on USA and JAP consoles
    • Partial region free support on Wii and GC original and backup games with different video mode (ie PAL<->USA, JAPAN,KOR)
    • Improved read settings for recordable media
    • Supports running GC games at Wii disk speed
    • GC Audio streaming Fix
    • Supports full-size DVD and DVD9 discs for GC homebrew
    • Supports GC multigame discs
    • Supports Wii and GC multidisc games
    • Does not modify RAM, making it virtually undetectable for the Wii
    • Compact design, best quality components, rock solid high speed controller
    • High speed and high secure Actel FPGA
    • Two LEDs indicate the D2SUN working status
    • Professional ESD packing
    • Comes with external control board, can enable/disable D2SUN chip, and can check the D2SUN working status in real time






    SunKey (And Lite/Pro - D2Sun)

    SunKey & SunKey Pro A3P125 Firmware v2.02 For BCA Support: Includes SunDisk/SunDriver Programmer also, support for the New Super Mario Brothers in Firmware V2.02 upgrade for SunKey & SunKey Pro and the new BCA check.

    Features:

    • plug and play,100% solderless
    • use 2 bit switch to choose region, support JAP/USA/KOR/EUR all regions perfectly
    • support all old and last wiis
    • support GC games
    • support homebrew roms
    • support all Wii games with same region
    • support partial Wii games with different region
    • come with 2 LEDs indication on board
    • # support USB update CPLD core and EEPROM firmware,never outday
    • # come with external switch configure board, can change the SUNKEY setting and not need open your Wii anymore, and not need burn DVD to do it
    • # the K1 support chip ON/OFF function
    • # the K4 for select REGION LOCK or REGION FREE
    • # the K5 for select UPDATE BLOCK or UPDATEABLE, you can play partial games and don't need update your Wii, it's no chance to make your Wii become brick!
    • # the K6 select AUTO BOOT GAME or not, it'll auto enter game and not need enter Wii menu first
    • # come with one external LED to indicate the SUNKEY working status

    Note: the "#" functions just for SUNKEY and SUNKEY Pro, not for SUNKEY Lite.






    SunDisk 16GB (D2Sun)

    SunDisk Programmer v1.6
    (See "SunKey And Lite/Pro - D2Sun" Above for Newer Updates)

    Features: This is a new revision of the Sunkey mod-chip which features a new 16GB flash (SSD) addon with USB 2.0 support.




    Wii Drive Key




    The first true modchip for D3 / d2nothing drives! Drivekey is a plug-and-play solderless solution for ALL current wii drives. It has region overrride features (USA/JAP/PAL/KOR), works with both Wii and GC games, including titles like Super Mario Galaxy and SSBB. The official specs for DriveKey include DVD & JTAG update as well as update blocker.

    DriveKey Feature List

    • Works on all Wii drives (DMS, D2A, D2B, D2C, D2C-2, D2E, D3/d2nothing)
    • Works on all Wii regions (USA, JAP, PAL, KOREA)
    • Compatible with D2B "cut pin" drives
    • Compatible with D2E "epoxy" drives (no need to remove epoxy)
    • Fully updatable via DVD and JTAG
    • Plug-and-play 2 minute installation
    • No soldering necessary
    • No external PC/laptop needed
    • Direct Boot of Wii original, import, and backup (copied) games
    • Direct Boot of Gamecube (Streaming audio in Gamecube games is not supported) original, import, and backup (copied) games
    • Supports multi-disc games
    • Supports dual-layer discs
    • Fully configurable Region Override
    • Fully configurable Update Blocker
    • Transparent stealth operation
    • Integrates proven D2CKey Intelligent Code Modifying System
    • No awkward USB interface - just insert DVD and play!
    • Supports, SMG, SSBB and other 'problem' titles
    • Ultra-low power consumption; does not interfere with normal Wii operation
    • FPGA fully updatable via JTAG external programmer
    • JTAG software automatically downloads individually signed updates from DriveKey server
    • SPI fully updatable via DVD
    • Fully configurable update blocker
    • Fully configurable region override
    • Enable/Disable DriveKey via the config menu
    • Config option to autoboot Wii discs (insert the disc, the game will load immediately!)

    Best of all, there is no need to burn/run a DVD to access the config options - you just press the eject button 3 times and presto! The config system loads directly from the SPI Flash!




    WiiZii (Matrix)

    The Matrix Team have announced a new Nintendo Wii modification chip that has an on-board SATA adapter that can connect to a stand alone hard drive for quick loading of your legal backup collection. It comes with 2Mbit of flash, requires no soldering and lets you retain the original functionality of your drive.

    Note that the chip pictured is a prototype and will be much smaller when produced. The chip will be able to boot images via a menu or burnt backup discs. We should have more details including all of the technical specifications in a couple of days.




    FlatMod FlatMii / FlatMii 125 / FlatMii Fusion

    FlatMii Remote iSO Loader v1.1
    FlatMii New Super Mario Brothers Fix
    Flatmod BCA Editor v1.0 - Flatmod BCA ISO editor for Windows. Patches the selected ISO for Flatmod with BCA data of your choosing.
    FlatMod seems to be similar to DriveKey, but with some additional features. FlatMod introduces the FlatMii Solderless concept in the Wii videoconsole modding. FlatMod is compatible with ALL the wii dvd drive chipsets, EPOXY'd and D3/D2nothing included , FlatMod is even the perfect companion if you are a FlatMii device owner being both 100% compatible inside the same wii, supporting not only BASIC features, FlatMod offers so advanced features as the SOLDER mods at the market.

    Play your Wii/Gamecube backup discs, DVD or DL formats are supported, Multi-iSO WII/GC and Upgrades. Blocker features makes this new method so effective as the normal ones and avoiding any kind of bricking issues. All them including the region free are enabled or disabled using a config disc. Soldering installation, clip or any software modification is NOT REQUIRED for FlatMod. Install FlatMod in only 5 minutes with a few "Plug and Play" steps. Why to be BASIC if you can get the MOST of the resting mods features ?

    • NO solder required
    • NO clip required
    • NO software modification required
    • Plug and Play 2 Minutes installation
    • ALL chipsets compatible including EPOXY & D3 boards
    • Wii/Gamecube & ISO9660 compatible
    • MultiIsos for Trimmed Isos Compatible
    • DVD and Double Layer media compatible
    • Region free & Antierror 001
    • Geckos, Mplayer and Homebrew Compatible
    • Updates blocker
    • 128k SPI Flash for Upgrades/config storing
    • DVD firmware Upgrades and Config Disc
    • Extra ACTEL Jtag & Spi upgrade hardware if needed

    FlatMii 125:

    • 100% Solderless
    • NO clip required
    • NO CUSTOM IOS required
    • 4.0 and Up Firmware compatible / Plug and Play
    • 2 in 1 / USB 2.0 ISO Streamer and BUILTIN drivechip function
    • ALL chipsets compatible including EPOXY & D3 drives
    • STANDALONE mode (No wii dvd drive/media needed)
    • COMBO drive/flatmii mode including drive modchip function
    • Highspeed USB 2.0 fast loadings
    • Wii/Gamecube/ISO9660/Multi and DL ISOS compatible
    • Region free and Upgrades Blocker
    • Full Compatible with Geckos,Mplayer,Emulators & Homebrew
    • Wii iso remote tool selector (requires homebrew capabilities)
    • Cheap,no more than 38Euros retail price
    • DVD drivechip EXPRESS CONFIG function
    • Protect drive system

    FlatMii Fusion:

    • Universal Wii Support
    • 100% solderless / Plug and Play
    • MicroSD & DVD modchip
    • Wii/Gamecube ISO compatible
    • No CUSTOM IOS required
    • Supports ALL wii in MicroSD mode
    • Supports ALL drives excepting D3-2
    • Partial region free (Not in 4.2 fw)
    • MicroSD/HC slot
    • WBFS filesystem
    • External ISO buttons control
    • OLED Display
    • Stylized WII embedded design
    • Multidisc support
    • Multiiso support
    • Autoboot / Updates blocker
    • Double Layer support
    • Config Express DVD mode
    • BCA protection backup system builtin
    • NEW SUPERMARIO BROS included
    • DVD/JTAG upgrades




    Wii Lid X4

    Wii Lid X4 Install Manual
    A brand new WII LID version for the mighty popular Wiikey 2. Forget everything you heard about cutting traces or figuring out which points to solder or not. With X4 you can easily set the switch according to your console or Wiikey 2 version.

    Zero (0) wires needs to be soldered with this version also you don`t void your consoles warranty since all you do is putting the WII LID to your DVD drive chipset.

    Each WII LID X4 comes packed in antistatic bag and includes: Chip back protection sticker, Chip front protection card and also a holographic sticker with serial nr so you can assure its an original, genuine WII LID X4 you have in your hands.

    Features:

    • Compatible with popular Wiikey 2
    • Zero (0) wires needs to be soldered
    • On/Off switch for D, E, F, G points
    • High quality and robust pcb material
    • Works with all versions DMS, D2A, D2B, D2C, D2C2 and D2E
    • Packed in antistatic bag
    • Comes with holographic, genuine sticker with serial number




    R-Right


    D-RIGHT is a 2in1 modchip that works on ALL Wii in the market!

    D-RIGHT = DRIVEKEY + WIIKEY2 all in one !

    Features:

    • Pre loaded from factory with a "DRIVEKEY-LIKE" firmware, so complete plug and play and ready for ALL WII consoles in the market
    • Optional support of "CODEINJECTION-LIKE" firmwares 6 wires for all WII consoles (not for D2-Nothing of course)*

    The modchip has on board a connector for an optional WIICLIP, that allow plug and play installation on 6 wires firmwares.

    * to program 6 wires firmware is necessary an INJECTUS programmer! Remember that D-RIGHT is programmed by factory ONLY with FLAT MOD firmware.

    Below are the Technical Specifications:

    • FLAT MODE FIRMWARE = Plug & Play like drivekey modchips (same features)
    • 6 WIRES FIRMWARE = optional 6 wires firmware available
    • Update Blocker feature. Available in the DVD UPGRADER. This feature will block harmful other-region updates.
    • Compatible with DMS, D2A, D2B, D2C, D2C-2 and D2E chipsets + D2NOTHING
    • Compatible with all regions, USA, JAP, PAL and KOREA
    • Compatible with D2B "cut pin" drives (does not require the cut pins to be connected)
    • Fully configurable and updatable via DVD and JTAG USB programmer
    • Micro-switches to configure the regional setting
    • Region override for WII and GameCube games
    • Direct Boot of WII original, import, and backup games
    • Direct Boot of GameCube original, import, and backup games
    • Direct boot of homebrew in GC mode
    • Supports multi-disc games, DVD-R, +R, +RW (no bit setting required)
    • Supports Dual Layer
    • Supports factory made 'silvers', even with incorrect header data
    • Supports, SMG, SSBB, Mario Kart and other 'problem' titles
    • Streaming audio-fix for GameCube games (not in FLAT MODE firmware)
    • Disk speed configurable via DVD, with separate settings for different media types
    • Recovery mode makes it impossible to brick the chip with a bad flash
    • 6x read spead with 6 wires firmware & 3x read speed with Flat Mode firmware




    WODE (Wii Optical Drive Emulator - Oscar Dalvit)
    WODE Pictures and Videos: http://www.ps3news.com/search.php?search=wode
    WODE Firmware v1.21: To update the Wode's system firmware download the update and copy it to an SD card formatted with the FAT filesystem. Insert the SD card into Wode and power on. Wode will then display the message "Wode Updating". The update process can take several minutes, when the update is complete Wode will reboot. The SD card can then be removed.
    • Fix "LAST" option in settings menu (broken in 1.20)
    • Enhanced scrolling of game Title ID
    • Added autorepeat to GC controller up & down
    WODE Firmware v1.25
    • Adds wrap top and bottom of game lists
    • Adds Display filename without extension setting
    • Adds /wbfs directory search (better USB loader compatibility)
    • Fixes NSMB .wbfs patched with BCA data
    • Fixes 256 file limit in GC menu
    • Includes FPGA V1.20
    WodeTool v1.25
    WODE WiFi LAN Configurator 1.0 Beta
    WODE update 2.2E Wifi Public Beta
    Features:

    • Play Wii & GC game ISOs direct from USB Mass Storage devices @8X read speed (HDD and FLASH drive)
    • Complete Solder free install solution
    • Easy to use GUI - LCD & Joystick - NO homebrew software required (no any update of console SO can block this device )
    • Region hack, Update blocker, Autoboot.
    • Passthrough with FLAT-MOD mode built-in, play your DVD-R Wii & GC backups and Imports @3X read speed
    • Powerful ARM9 MCU
    • Totally Flexible Linux Kernel
    • USB hub support for multiple USB devices connection
    • Great File System support - use existing WBFS formatted media or 'drag and drop' ISOs to existing USB devices

    - NTFS
    - WBFS
    - EXT3FS
    - HPFS

    Future updates will bring more cool features:

    • Disc ripping to WBFS
    • USB WiFi & SAMBA streaming
    • Torrent & eMule download Client
    WODE Firmware v2.00
    [size=1]MCU 2.00 FPGA 2.00 31/3/10 The Ripper
    [main] Fix eject GC on "Region Mismatch"
    [main] Disk ripping
    [main] Adds NTFS R/W support
    [main] Unlimited directory depth
    [main] Wii Channel support
    [main] Fixes Favorites data not updated after ISO list resorted
    [DI] Adds TitleID data to "Get ISO Info"
    [main] Fixes Channels (MarioKart, Rabbids etc)
    [main] Fixes GC Emu compatibility
    [main] Fixes LEGO Batman Error 001 check
    Attached Thumbnails<br><br> Attached Thumbnails

    WiiNja.jpg   WiiNja_Install_Points.jpg   WiiNja_Installed.jpg   WiiKey.jpg   Wi-ic.jpg   WiiBuster.jpg  

    WiiBuster_Install_Points.jpg   WiiBuster_Installed.jpg   WiiMod.jpg   WiiMod_Install_Points.jpg  

  2. #2
    Forum Moderator PS3 News's Avatar
    Join Date
    Apr 2005
    Posts
    27,389
    Sponsored Links
    Sponsored Links
    Additional pictures/files for the first post...
    Attached Thumbnails<br><br> Attached Thumbnails

    WiiMod_Installed.jpg   Wiip.jpg   CycloWiz.jpg   CycloWiz_Defective_Units.jpg   CycloWiz_Installed.jpg   Awiier.jpg  

    Awiier_Install_Points.jpg   Awiier_Installed.jpg  
    Attached Files Attached Files

  3. #3
    Forum Moderator PS3 News's Avatar
    Join Date
    Apr 2005
    Posts
    27,389
    Sponsored Links
    Sponsored Links
    Additional pictures/files for the first post...
    Attached Thumbnails<br><br> Attached Thumbnails

    WiiKey_Final.jpg   WiiSKAS_Install_Points.jpg   WiiSKAS_Working_1.jpg   WiiSKAS_Working_2.jpg   Chiip.jpg   Chiip_Install_Points.jpg  

    WiiSKAS_Fusebit_Settings.jpg  
    Attached Files Attached Files

  4. #4
    Forum Moderator PS3 News's Avatar
    Join Date
    Apr 2005
    Posts
    27,389
    Additional pictures/files for the first post...

  5. #5
    Forum Moderator PS3 News's Avatar
    Join Date
    Apr 2005
    Posts
    27,389
    Additional pictures/files for the first post...
    Attached Thumbnails<br><br> Attached Thumbnails

    WiiKey_Installed.jpg   WiiKey_Config_Menus.jpg   WiiFree_Install_Points_v1.1.jpg  
    Attached Files Attached Files

  6. #6
    Forum Moderator PS3 News's Avatar
    Join Date
    Apr 2005
    Posts
    27,389
    Additional pictures/files for the first post...

  7. #7
    Forum Moderator PS3 News's Avatar
    Join Date
    Apr 2005
    Posts
    27,389
    Additional pictures/files for the first post...

  8. #8
    Forum Moderator PS3 News's Avatar
    Join Date
    Apr 2005
    Posts
    27,389
    Additional pictures/files for the first post...

  9. #9
    Forum Moderator PS3 News's Avatar
    Join Date
    Apr 2005
    Posts
    27,389
    Additional pictures/files for the first post...
    Attached Thumbnails<br><br> Attached Thumbnails

    Wiizard.png   Awiier_2_IC_Pin-Out.jpg  
    Attached Files Attached Files

  10. #10
    Forum Moderator PS3 News's Avatar
    Join Date
    Apr 2005
    Posts
    27,389
    Additional pictures/files for the first post...
    Attached Thumbnails<br><br> Attached Thumbnails

    WiiM.jpg   WiiM_Installed.jpg   Wi-ic_MicroSD_Edition.jpg  
    Attached Files Attached Files

 

Sponsored Links

Page 1 of 4 123 ... LastLast
Affiliates - Contact Us - PS3 Downloads - Privacy Statement - Site Rules - Top - © 2014 PlayStation 3 News