Guide: XBox 360 Hack - Free60 Homebrew With No Chip Needed

Submitter: PS3 News - (http://www.logic-sunrise.com)

Site Tags: guide xbox 360 hack free60 homebrew chip needed

Category: XBox 360

Today French site Logic-Sunrise.com (linked above) has published a guide based on the Free60 Exploit and the work of Tiros.

For those seeking to give it a try, to quote: "We're going to explain you the Free60 exploit, which consists in launching decrypted code (hello word) on a Xbox 360 system.

Once this bug has been well exploited, It will be possible, in a near future, to use your Xbox 360 as a media center, and for example lauch XBMC, or homebrews (megadrive, SNES emulators, and others) and maybe Xbox 360 games from the hard disk as well, everything a Xbox 1st generation did but more powerfully !

But before being there, there is a long way to do, even if the basis is here : it's now possible to load decrypted code on Xbox 360 system. It's been for 4years we have waiting for this huge news !

This tutorial is written in order to explain the way to hack you Xbox 360. No chips needed !

What you need :

• a Xbox 360 XENON system
• parallel port adaptater
• NAND Pro, available here : http://www.logic-sunrise.com/telechargement-40683-nand-pro.html
• solder gear
• a PC with parallel port (printer port)
• three 330 Ohms resistances

Let's Go ! :

1 - 1 - Open up your Xbox 360 system

You can find the tutorial here : http://www.logic-sunrise.com/dossiers-et-tutoriaux-16074-demonter-sa-xbox-360.html

2 - link the motherboard solder points to the parallel port ones :

3 - Download and install the NAND Pro, available in download here : http://www.logic-sunrise.com/telechargement-40683-nand-pro.html Then unzip the package, and install the port95nt.exe

You must reboot your PC. Once on Windows, launch a CMD MsDOS (start, run, cmd, then press enter). Run in the unzipped directory : NandPro.exe, writing in the CMD : NandPro.exe lpt: -r16 nand.bin

NandPro is going to test all you parallel ports, and recover you system Nand. Make sure you keep it
With a parallel port, the operation can take 30mins. Once the thing is done, you should get your nand.bin, about 16Mb

Operation success !

Now you can Write the nand, by a hacked one (xenon_hack.bin for example), typing : NandPro.exe lpt: -w16 nand.bin

Final

READING WILL OVER-WRITE AN EXISTING FILE WITHOUT WARNING!
NEW LOG FILE WILL OVERWRITE OLD WITHOUT WARNING!

Posted 93 days ago

2 Comments

PermaLink

Comments

By thon0925 on 13 weeks ago:

The tutorial is well written, but they blatantly took relapse's photo and tried to put their watermark over his without his permission. Otherwise, it's a nice guide. :tup:

By JeffJ on 13 weeks ago:

too bad its only the xenon boards, id live to just straight flash one of my HDMI units.